M500IT 2.5-Inch NAND Flash MLC SSD Features M500IT 2.5-Inch SATA NAND Flash MLC SSD MTFDDAK060MBD, MTFDDAK120MBD, MTFDDAK240MBD, MTFDDAK064MBD, MTFDDAK128MBD, MTFDDAK256MBD Low power consumption Features 4 150mW TYP Micron 20nm MLC NAND Flash Endurance: Total bytes written (TBW) RoHS-compliant package Up to 240TB SATA 6 Gb/s interface Capacity (unformatted): 60GB, 64GB, 120GB, TCG/Opal 2.0-compliant self-encrypting drive 128GB, 240GB, 256GB (SED) 2.5 inch 7mm form factor Hardware-based AES-256 encryption engine Secure firmware update with digitally signed firm- ATA modes supported ware image PIO mode 3, 4 Operating temperature 5 Multiword DMA mode 0, 1, 2 Extended range (40C to +85C) Ultra DMA mode 0, 1, 2, 3, 4, 5, 6 Industry-standard, 512-byte sector size support 1. Typical I/O performance numbers as meas- Notes: Hot-plug/hot-remove capable ured fresh-out-of-the-box (FOB) using Iome- ter with a queue depth of 32 and write Device sleep (DEVSLP), extreme low-power mode cache enabled. Native command queuing support with 32-com- 2. 4KB transfers used for READ/WRITE latency mand slot support values. ATA-8 ACS3 command set compliant 3. The product achieves a mean time to failure ATA security feature command set and password (MTTF) based on population statistics not login support relevant to individual units. Secure erase (data page) command set: fast and se- 4. Active average power measured during exe- cure erase cution of MobileMark with DIPM (device- Sanitize device feature set support initiated power management) enabled. Self-monitoring, analysis, and reporting technology 5. Temperature measured by SMART attribute (SMART) command set 194. Adaptive thermal monitoring Power loss protection for data-at-rest Warranty: Contact your Micron sales representative 1, 2 Performance for further information regarding the product, Sequential 128KB READ: Up to 500 MB/s including product warranties. Sequential 128KB WRITE: Up to 250 MB/s Random 4KB READ: Up to 65,000 IOPS Random 4KB WRITE: Up to 60,000 IOPS READ/WRITE latency: 160s/40s (TYP) Reliability 3 MTTF: 3.0 million device hours Static and dynamic wear leveling Uncorrectable bit error rate (UBER): <1 sector 16 per 10 bits read 09005aef864ead5e Micron Technology, Inc. reserves the right to change products or specifications without notice. 1 m500it 2 5 MLC industrial ssd.pdf - Rev. G 6/16 EN 2015 Micron Technology, Inc. All rights reserved. Products and specifications discussed herein are subject to change by Micron without notice.M500IT 2.5-Inch NAND Flash MLC SSD Features Part Numbering Information Microns M500IT SSD is available in different configurations and densities. The chart below is a comprehensive list of options for the M500IT series devices not all options listed can be combined to define an offered product. Visit www.micron.com for a list of valid part numbers. Figure 1: Part Number Chart MT FD D AK 060 M BD - 1 AH 1 2 IT YY ES Micron Technology Production Status Blank = Production Product Family ES = Engineering sample FD = Flash drive MS = Mechanical sample Drive Interface Customer Designator D = SATA 6.0 Gb/s YY = Standard hardware Drive Form Factor Additional Feature Set AK = 2.5-inch (7mm) IT = Industrial temperature and grade Drive Density Extended Firmware Features 060 = 60GB Z = Standard 064 = 64GB 2 = SED (self-encrypting drive) 120 = 120GB 128 = 128GB Sector Size 240 = 240GB 1 = 512-byte 256 = 256GB NAND Flash Component NAND Flash Type AH = 64Gb, MLC, x8, 3.3V (20nm) M = MLC AK = 128Gb, MLC, x8, 3.3V (20nm) Product Family BOM Revision BD = M500IT For example: A = ES 1 = 1st generation 2 = 2nd generation Table 1: Part Ordering Information Capacity (GB) Valid Part Number Description 60 MTFDDAK060MBD-2AH12ITYY 2nd generation 120 MTFDDAK120MBD-2AK12ITYY 2nd generation 240 MTFDDAK240MBD-2AK12ITYY 2nd generation 64 MTFDDAK064MBD-1AH12ITYY 1st generation 128 MTFDDAK128MBD-1AK12ITYY 1st generation 256 MTFDDAK256MBD-1AK12ITYY 1st generation 64 MTFDDAK064MBD-AAH12ITYYES 1st generation 128 MTFDDAK128MBD-AAH12ITYYES 1st generation 256 MTFDDAK256MBD-AAH12ITYYES 1st generation 09005aef864ead5e Micron Technology, Inc. reserves the right to change products or specifications without notice. 2 m500it 2 5 MLC industrial ssd.pdf - Rev. G 6/16 EN 2015 Micron Technology, Inc. All rights reserved.