C400 2.5-Inch NAND Flash SSD
Features
C400 2.5-Inch SATA NAND Flash SSD
MTFDDAC128MAM, MTFDDAC256MAM, MTFDDAC512MAM
MTFDDAK128MAM, MTFDDAK256MAM, MTFDDAK512MAM
Reliability
Features
3
MTTF: 1.2 million device hours
Micron 25nm MLC NAND Flash
Static and dynamic wear leveling
RoHS-compliant package
Uncorrectable bit error rate (UBER): <1 sector
15
SATA 6 Gb/s interface
per 10 bits read
ATA modes supported
Low power consumption
4
PIO mode 3, 4
<280mW TYP
Multiword DMA mode 0, 1, 2
Endurance: Total bytes written (TBW) 72TB
5
Ultra DMA mode 0, 1, 2, 3, 4, 5
Capacity (unformatted): 128GB, 256GB, 512GB
Industry-standard, 512-byte sector size support
Mechanical 9.5mm height
Hot-plug capable
SATA connector: 5V 10%
Native command queuing support with 32-com-
2.5-inch drive: 100.5mm x 69.85mm x 9.5mm
mand slot support
Weight: 75g (MAX)
ATA-8 ACS2 command set compliant
Mechanical 7.0mm height
ATA security feature command set and password
SATA connector: 5V 10%
login support
2.5-inch drive: 100.5mm x 69.85mm x 7.0mm
Secure erase (data page) command set: fast and se-
Weight: 73g (MAX)
cure erase
Field-updateable firmware
Self-monitoring, analysis, and reporting technology
Operating temperature
6
(SMART) command set
Commercial (0C to +70C)
1, 2
Performance
1. Typical I/O performance numbers as meas-
Notes:
Sequential 128k READ: up to 500 MB/s
ured using Iometer with a queue depth of
Sequential 128k WRITE: up to 260 MB/s
32 and write cache enabled.
Random 4k READ: up to 45,000 IOPS
2. 4K transfers used for READ/WRITE latency
Random 4k WRITE: up to 50,000 IOPS
values.
PCMark Vantage (HDD test suite score): up to
3. The product achieves a mean time to failure
75,000
(MTTF) based on population statistics not
READ/WRITE latency: 55s (TYP)
relevant to individual units.
4. Active power measured during execution of
MobileMark 2007 with DIPM (device-initi-
ated power management) enabled.
5. 1GB = 1 billion bytes; formatted capacity is
less.
6. Drive case temperature.
Warranty: Contact your Micron sales representative
for further information regarding the product,
including product warranties.
PDF: 09005aef8455a0a5 Micron Technology, Inc. reserves the right to change products or specifications without notice.
1
c400_2_5_128-512gb.pdf - Rev. F 07/12 EN 2011 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.C400 2.5-Inch NAND Flash SSD
Features
Part Numbering Information
Microns C400 SSD is available in different configurations and densities. Visit www.micron.com for a list of valid
part numbers.
Figure 1: Part Number Chart
MT FD D AC xxx M AM - 1 K x x xx ES
Production Status
Micron Technology
Blank = Production
Product Family ES = Engineering sample
FD = Flash drive
Operating Temperature Range
Drive Interface Blank = Commercial (0C to +70C)
D = SATA 6.0 Gb/s
Hardware Feature Set
Drive Form Factor Blank = Null
AA = Contact factory
AC = 2.5-inch (9.5mm)
AB = Contact factory
AK = 2.5-inch (7mm)
AC = Contact factory
Drive Density
Firmware Feature Set
128 = 128GB
Blank = Null
256 = 256GB
512 = 512GB 1 = Contact factory
2 = Contact factory
NAND Flash Type
M = MLC BOM Revision
For example:
1 = 1st generation
Product Family
2 = 2nd generation
AM = C400
NAND Flash Component
J = 32Gb, MLC, x8, 3.3V (25nm)
K = 64Gb, MLC, x8, 3.3V (25nm)
Sector Size
1 = 512-byte
PDF: 09005aef8455a0a5 Micron Technology, Inc. reserves the right to change products or specifications without notice.
2
c400_2_5_128-512gb.pdf - Rev. F 07/12 EN 2011 Micron Technology, Inc. All rights reserved.