M600 M.2 Type 2260/2280 NAND Flash SSD
Features
M600 M.2 Type 2260/2280 NAND Flash
SSD
MTFDDAV128MBF, MTFDDAV256MBF, MTFDDAV512MBF,
MTFDDAY128MBF, MTFDDAY256MBF, MTFDDAY512MBF
Reliability
Features
3
MTTF: 1.5 million device hours
Micron 16nm MLC NAND Flash
Static and dynamic wear leveling
RoHS-compliant package
Uncorrectable bit error rate (UBER): <1 sector
15
SATA 6 Gb/s interface
per 10 bits read
TCG/Opal 2.0-compliant self-encrypting drive
Low power consumption
4
(SED)
150mW TYP
Compatible with Microsoft eDrive
Endurance: Total bytes written (TBW)
Hardware-based AES-256 encryption engine
Up to 300TB
ATA modes supported
Capacity (unformatted): 128GB, 256GB, 512GB
PIO mode 3, 4
Mechanical
Multiword DMA mode 0, 1, 2
M.2Socket 2" connector: 3.3V 5%
Ultra DMA mode 0, 1, 2, 3, 4, 5, 6
Type 2260: 60mm x 22mm x 3.6mm
Industry-standard, 512-byte sector size support
Type 2280: 80mm x 22mm x 2.3mm
Device Sleep (DEVSLP), extreme low power mode
Weight: 10g (MAX)
Native command queuing support with 32-com-
Secure firmware update with digitally signed firm-
mand slot support
ware image
ATA-8 ACS3 command set compliant
Operating temperature
5
ATA security feature command set and password
Commercial (0C to +70C)
login support
1. Typical I/O performance numbers as meas-
Notes:
Secure erase (data page) command set: fast and se-
ured fresh-out-of-box (FOB) using Iometer
cure erase
with a queue depth of 32 and write cache
Sanitize device feature set support
enabled.
Self-monitoring, analysis, and reporting technology
2. 4KB transfers used for READ/WRITE latency
(SMART) command set
values.
Dynamic write acceleration
3. The product achieves a mean time to failure
Adaptive thermal monitoring
(MTTF) based on population statistics not
Power loss protection for data-at-rest
relevant to individual units.
1, 2
Performance
4. Active average power measured during exe-
PCMark Vantage (HDD test suite score): up to
cution of MobileMark with DIPM (device-
87,000
initiated power management) enabled.
Sequential 128KB READ: up to 560 MB/s
5. Temperature measured by SMART attribute
Sequential 128KB WRITE: up to 510 MB/s 194.
Random 4KB READ: up to 100,000 IOPS
Warranty: Contact your Micron sales representative
Random 4KB WRITE: up to 88,000 IOPS
for further information regarding the product,
READ/WRITE latency: 120s/30s (TYP)
including product warranties.
PDF: 09005aef859ad464 Micron Technology, Inc. reserves the right to change products or specifications without notice.
1
m600_m2_2260_2280_ssd.pdf - Rev. C 9/14 EN 2014 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.M600 M.2 Type 2260/2280 NAND Flash SSD
Features
Part Numbering Information
Microns M600 SSD is available in different configurations and densities. The chart below is a comprehensive list
of options for the M600 series devices; not all options listed can be combined to define an offered product. Visit
www.micron.com for a list of valid part numbers.
Figure 1: Part Number Chart
MT FD D AV 128 M BF - 1 AN 1 2 AB YY ES
Micron Technology Production Status
Blank = Production
Product Family ES = Engineering sample
FD = Flash drive MS = Mechanical sample
Drive Interface Customer Designator
D = SATA 6.0 Gb/s YY = Standard
Drive Form Factor Feature Set
AK = 2.5-inch (7mm) AA = Contact factory
AT = mSATA AB = Standard
AV = M.2 (80mm x 22mm 2.3mm) AC = Contact factory
AY = M.2 (60mm x 22mm 3.5mm) ZZ = Blank
Drive Density Extended Firmware Features
064 = 64GB Z = Non-Encrypted
128 = 128GB 1 = Contact factory
256 = 256GB 2 = SED (self-encrypting drive)
512 = 512GB
1T0 = 1024GB Sector Size
1 = 512 byte
NAND Flash Type
M = MLC NAND Flash Component
AN = 128Gb, MLC, x8, 3.3V (16nm)
Product Family
BF = M600 BOM Revision
For example:
1 = 1st generation
2 = 2nd generation
PDF: 09005aef859ad464 Micron Technology, Inc. reserves the right to change products or specifications without notice.
2
m600_m2_2260_2280_ssd.pdf - Rev. C 9/14 EN 2014 Micron Technology, Inc. All rights reserved.