SanDisk X300 SSD (Solid State Drive) RELIABLE AND RESPONSIVE PERFORMANCE WITH LOW POWER Based on state of the art 1Ynm X3 flash technology, the SanDisk X300 SSD SATA SAS PCIe delivers performance with high reliability and low power. It features nCache 2.0, SanDisks next generation tiered caching technology, designed to improve X300 KEY FEATURES NCACHE 2.0 IMPROVES SSD SSD responsiveness for most corporate and consumer workloads. RESPONSIVENESS FOR HIGH PRODUCTIVITY WORKLOADS The X300 is highly versatile and can accommodate a wide range of computing DATAGUARD CLIENT - PROVIDES AN platforms. It is available in 2.5 7mm cased, M.2 2280, and mSATA form factors ADDITIONAL LAYER OF DATA PROTECTION with capacities of 128GB, 256GB, 512GB, and 1TB*. USING PAGE-LEVEL STRIPING WITH DISTRIBUTED PARITY LOW POWER WITH DEVSLP SUPPORT nCache 2.nCache II0 TLC NAND Flash UP TO 1TB* CAPACITIES IN 2.5 7MM, M.2 2280, AND MSATA FORM FACTORS nCache 2.nCache II0 TLC NAND Flash TESTED FOR 65 TBW (128GB) AND 80 TBW nCache 2.0 nCache II TLC NAND Flash (256GB-1TB) nCache 2.nCache II0 TLC NAND Flash SATA REVISION 3.2 6GB/S INTERFACE nCache 2.nCache II0 TLC NAND Flash WINDOWS WHCK CERTIFIED DYNAMIC THERMAL THROTTLING nCache 2.0 nCache II TLC NAND Flash nCache 2.nCache II0 TLC NAND Flash nCache 2.nCache II0 TLC NAND Flash SATA DRAM SLC Main Storage Blocks 4/8CH 6Gb/s Cache Blocks nCache 2.0 Technology nCache 2.0 uses a combination of SLC and X3/TLC flash blocks to improve endurance, increase efficiency, and boost performance. By first writing all of the data to SLC blocks, the write amplification on the X3 blocks is minimized. DataGuard Client The X300 SSD also includes a new and robust on-the-fly error handling mechanism called DataGuard Client. It uses page-level striping with distributed parity for an added layer of data protection and can recover errors that other traditional error correction mechanisms cannot. Host Controller DDR DRAMLow Power SanDisk X300 SSD Product Features and Specifications The X300 utilizes a SATA DEVSLP Specifications are preliminary and subject to change low-power mode to minimize its Device SanDisk X300 SSD power consumption during idle Form Factor 7mm 2.5-inch Cased, M.2 2280, mSATA periods. DEVSLP enables the SSD Interface SATA III (6 Gb/s) backward compatible to to completely shut off its SATA PHY, SATA II (3 Gb/s) and SATA I (1.5 Gb/s) thus resulting in much lower power 1 Performance 128GB 256GB 512GB 512GB* 1TB* consumption compared to SATA Seq. Read up to (MB/s) 520 520 525 530 520 Slumber. This increases the amount Seq. Write up to (MB/s) 450 470 470 470 460 of usable hours per battery charge, Rand Read up to (IOPS) 73k 91k 96k 94k 98k which is essential for modern mobile Rand Write up to (IOPS) 40k 57k 68k 70k 67k devices. 2 Endurance (TBW) 65 80 80 80 80 Power (Average) 128GB 256GB 512GB 512GB* 1TB* TCO 3 Active Power (mW) 95 95 95 95 95 SanDisk SSDs can improve total cost Max Read Operating (mW) 2,300 2,450 2,500 2,500 2,500 of ownership (TCO) by reducing Max Write Operating (mW) 2,950 3,900 3,900 3,900 3,900 downtime due to hard drive failures. Slumber (mW) 70 70 70 70 70 They also offer lower latency and DEVSLP (mW) <7 <7 <7 <7 <7 greater read/write speeds over 4 6 MTTF Up to 1,752,000 hours traditional HDDs . IT departments 2.5: 7.00mm x 69.85mm x 100.5mm 58 3g Product Dimensions & can extend the useful life of their PC Weight M.2 2280: 2.23mm x 22.00mm x 80.0mm 7.5 0.5g inventory by upgrading the HDDs mSATA: 3.82mm x 29.85mm x 50.8mm 7.5 0.5g to the X300 SSD, thus prolonging Environmental replacement cycles and maximizing Operating Temperatures 0C to 70C asset value. Non-operating Temperatures -55C to 85C Specifications subject to change without notice. Operating Vibration 5.0 gRMS, 10 2000 Hz * Only available as (8-channel) SATA 2.5 7mm cased form factor. 1 Up to stated speed. Performance is based on the CrystalDiskMark benchmark using a 1000MB range for an X300 SSD setup as a secondary drive on Non-operating Vibration 4.9 gRMS, 7 800 Hz a GIGABYTE GA-Z77X-UD5H host system consisting of an Intel i7-3770 3.4GHz, 8M, Ivy Bridge, 8GB RAM, Windows 8 , and iRST 12.9. Performance may vary based on host device. 1 megabyte (MB) = 1 million bytes. IOPS = Shock 1,500 G 0.5 msec half sine input/output operations per second. 2 Endurance of the X300 SSD is calculated using JEDEC client workload (JESD219). TBW = terabytes written. Certifications FCC, UL, TUV, KC, BSMI, VCCI 3 Power measurements 25C. Based on FW version with HIPM-enable. 4 MTTF = Mean Time To Failure based on internal testing using Telcordia stress part testing. 5 Warranty 3 Years 5 5 year warranty in regions not recognizing limited. See www.sandisk.com/ 6 As compared to 7200 RPM SATA 2.5 hard drive. Based on published specifications and internal benchmarking tests. wug for more details. Ordering Information SanDisk is a trademark of SanDisk Corporation, registered in the United States and other countries. nCache is a trademark of Form Factor Capacity SKU SanDisk Corporation. Other brand names mentioned herein are for identification purposes only and may be the trademarks of M.2 2280 128GB SD7SN6S-128G-1022/1122 their respective holder(s). M.2 2280 256GB SD7SN6S-256G-1022/1122 M.2 2280 512GB SD7SN6S-512G-1022/1122 Contact information businesspartners sandisk.com mSATA 128GB SD7SF6S-128G-1022/1122 mSATA 256GB SD7SF6S-256G-1022/1122 mSATA 512GB SD7SF6S-512G-1022/1122 2.5 7mm 128GB SD7SB6S-128G-1022/1122 2.5 7mm 256GB SD7SB6S-256G-1022/1122 SOLID STATE FOR BUSINESS 2.5 7mm 512GB SD7SB7S-512G-1022/1122 Corporate Headquarters: 2.5 7mm 1TB SD7SB7S-010T-1022/1122 951 SanDisk Drive Pack-Out Option Use: Milpitas, CA 95035-7933, USA -1022 = Bulk -1122 = Individual Package www.sandisk.com