S600DC Series 2.5-Inch SAS NAND Flash SSD
Features
S600DC Series 2.5-Inch SAS NAND Flash
SSD
MTFDJAK400MBS, MTFDJAK400MBT, MTFDJAK800MBS,
MTFDJAK800MBT, MTFDJAL1T6MBS, MTFDJAL1T6MBT,
MTFDJAL3T2MBS, MTFDJAL3T2MBT, MTFDJAK480MBT,
MTFDJAK960MBT, MTFDJAL1T9MBT, MTFDJAL3T8MBT,
MTFDJAL1T9MBU, MTFDJAL3T8MBU, MTFDJAK200MBW,
MTFDJAK400MBW
4
Endurance: TBW over warranty period
Features
S630DC (23 DWPD):
Four endurance levels
400GB-2.1PB, 480GB-2.6PB,
S655DC = 25 DWPD; S650DC = 10 DWPD
800GB-2.9PB, 960GB-5.2PB,
S630DC = 23 DWPD; S610DC = <1 DWPD
1600GB-5.8PB, 1920GB-10PB,
Micron 16nm MLC NAND Flash
3200GB-12PB, 3840-21PB
RoHS-compliant package
S610DC (1 DWPD):
SAS
1920GB-2.8PB, 3840GB-5.6PB
Interface = 12 Gb/s
Electrical
Speed = 3 Gb/s, 6 Gb/s, 12 Gb/s, and auto-speed
Supply voltage: 5 V (5%) and 12 V (5%)
DC DC
negotiation
Mechanical
SAS-3 support
2.5-inch drive: 100.5mm 69.85mm 7mm, and
SAM-5 compliant
100.5mm 69.85mm 15mm
Enterprise sector size support = 512, 520, 524, 528,
Field-upgradeable firmware
4096, 4160, 4192, and 4224-byte
Power consumption: 9W (TYP) and 12W (MAX)
Hot-plug capable
Configurable through information exceptions
128-entry command queue depth
mode page
Digitally signed firmware for SED and non-SED
Operating temperature
3
FIPS140-2 level 2 certification option available on
0C to +50C (MAX)
each S650DC 2.5-inch device:
400GB, 800GB, 1600GB, and 3200GB
1. Product achieves a mean time to failure
Notes:
Secure erase via format unit (MTTF) based on population statistics that
are not relevant to individual units.
Reliability
1
MTTF: 2.5 million device hours 2. 1GB = 1 billion bytes; formatted capacity is
less.
Static and dynamic wear leveling
17
3. Based on ambient air temperature.
Uncorrectable bit error rate (UBER): 1 10 bits
transferred 4. Total bytes written (TBW): Warranty de-
2
fined in the product manual is five years or
Capacity (unformatted): 200GB, 400GB, 480GB,
device expiration as indicated by the device
800GB, 960GB, 1600GB, 1920GB, 3200GB, 3840GB
4 life indicator, whichever comes first.
Endurance: TBW over warranty period
S655DC (25 DWPD):
Warranty: Contact your Micron sales representative
200GB-8PB, 400GB-17PB
for further information regarding the product, includ-
S650DC (10 DWPD):
ing product warranties.
400GB-7PB, 800GB-14PB
1600GB-29PB, 3200GB-58PB
CCMTD-1725822587-3891 Micron Technology, Inc. reserves the right to change products or specifications without notice.
1
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 2015 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.S600DC Series 2.5-Inch SAS NAND Flash SSD
Features
Table 1: Performance
Notes apply to entire table
Sequential Random Random
128KB Transfer 4KB Transfer 4KB Transfer (70/30)
Device
and Read Write Read Write Mixed Read/Write Average
Capacity (MB/s) (MB/s) (KIOPS) (KIOPS) (KIOPS) Latency (s)
S655DC
200GB 1550 600 200 120 85 115
400GB 1700 850 200 120 115 115
S650DC
400GB 1550 625 180 67 80 115
800GB 1850 850 200 80 105 115
1600GB 1900 850 200 80 120 115
3200GB 1900 800 200 80 120 115
S630DC
400GB 1400 490 180 20 45 115
480GB 1550 615 180 30 45 115
800GB 1400 710 180 20 45 115
960GB 1700 850 180 30 65 115
1600GB 1600 850 180 20 45 115
1920GB 1850 850 180 30 65 115
3200GB 1600 850 180 20 45 115
3840GB 1850 770 180 30 65 115
S610DC
1920GB 1700 850 190 12 45 115
3840GB 1600 770 190 15 45 115
Notes: 1. Typical I/O performance numbers: measured using an iometer in a steady state region with a queue depth of
32 for sequential and random transfers and write cache enabled; a queue depth of 1 for READ/WRITE laten-
cy values.
2. Consistent host system interface, configurations, and variables: maintained with variation only in the drive
being tested.
3. Response time measurement conditions: recorded with nominal power at 25 C ambient temperature.
4. Page-to-page response times: derived from all possible page-to-page accesses on a sequentially precondi-
tioned drive.
5. Average response time: derived from at least 5000 access measurements between programmable pages on a
randomly preconditioned drive to ensure a true statistical random average.
CCMTD-1725822587-3891 Micron Technology, Inc. reserves the right to change products or specifications without notice.
2
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 2015 Micron Technology, Inc. All rights reserved.