3N261 66133 3N262 TO-18 OPTOCOUPLERS 3N263 OPTOELECTRONIC PRODUCTS DIVISION 12/01/2014 Features: Applications: High Reliability Eliminate ground loops Electrically similar to 4N47, 4N48, 4N49 Base lead eliminated for improved noise immunity Level shifting Line receiver Rugged package +1 kV electrical isolation Switching power supplies Stability over wide temperature range Motor control DESCRIPTION The 66133 contains an infrared LED optically coupled to a silicon phototransistor in a hermetic 4 lead TO-18 package. The collector of the phototransistor is electrically connected to the case. The internal base connection has been eliminated for improved noise immunity. The 3N261, 3N262 and 3N263 can be supplied to commercial or screened quality levels as well as to customer specifications. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage ........................................................................................................................................................ 1000 V Emitter-Collector Voltage ........................................................................................................................................................... 7 V Collector-Emitter Voltage ......................................................................................................................................................... 40 V Reverse Input Voltage .............................................................................................................................................................. 2 V Input Diode Continuous Forward Current at (or below) 65C Free-Air Temperature (see note 1) ..................................... 40 mA Continuous Collector Current ............................................................................................................................................... 20 mA Continuous Transistor Power Dissipation at (or below) 25C Free-Air Temperature (see Note 2) ................................ 190 mW Storage Temperature ........................................................................................................................................... -55C to +150C Operating Free-Air Temperature Range........................................................................................................... -55C to +125C Lead Solder Temperature (10 seconds max, 1/16 from case) ........................................................................................... 240C Notes: 1. Derate linearly to 125C free-air temperature at the rate of 0.67 mA/C. 2. Derate linearly to 125C free-air temperature at the rate of 1.9 mW/C. Package Dimensions Schematic Diagram 4 LEADS 0.030 0.76 0.019 0.48 0.016 0.41 0.100 2.54 3 4 3 0.230 5.84 0.195 4.95 4 2 0.209 5.31 0.178 4.52 1 1 2 0.210 5.33 0.500 12.70 0.170 4.32 MIN ALL DIMENSIONS ARE IN INCHES MILLIMETERS THE COLLECTOR IS IN ELECTRICAL CONTACT WITH THE CASE. Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E.Walnut St., Garland, TX 75040 (972)272-3571 Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES MICROPAC.COM 3N261 66133 3N262 TO-18 OPTOCOUPLERS 3N263 12/01/2014 ELECTRICAL CHARACTERISTICS INPUT LED T = 25C A PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS Input Diode Static Reverse Current I 100 nA V = 2 V R R Input Diode Static Forward Voltage V 0.8 1.5 V I = 10 mA F F OUTPUT TRANSISTOR T = 25C A PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS Collector-Emitter Breakdown Voltage V 40 V I = 1 mA, I = 0 (BR)CEO C F Emitter-Collector Breakdown Voltage V 7 V I = 100 A, I = 0 (BR)ECO E F Collector Dark Current I 100 nA V = 20 V, I = 0 mA D CE F COUPLED CHARACTERISTICS T = 25C A PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS On State Collector Current 3N261 I 0.5 mA V = 5 V, I = 1 mA C(ON) CE F On State Collector Current 3N262 I 1 mA V = 5 V, I = 1 mA C(ON) CE F On State Collector Current 3N263 I 2 mA V = 5 V, I = 1 mA C(ON) CE F Collector-Emitter Saturation Voltage 3N261 I = 2 mA, I = 0.5 mA F C 3N262 V 0.3 V I = 2 mA, I = 1 mA CE(SAT) F C 3N263 I = 2 mA, I = 2 mA F C Rise Time 3N261 10 20 3N262 t 10 20 s V = 10 V, I = 5 mA, R = 100 r CE F L 3N263 15 25 Fall Time 3N261 10 20 3N262 t 10 20 s V = 10 V, I = 5 mA, R = 100 f CE F L 3N263 15 25 DC Isolation Voltage V 1000 V I = 100 nA IO IO RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX UNITS Input Current, Low Level I 0 10 A FL Input Current, High Level I 1 20 mA FH Supply Voltage V 5 10 V CE SELECTION GUIDE PART NUMBER PART DESCRIPTION 66133-001 3N261, Commercial 66133-002 3N262, Commercial 66133-003 3N263, Commercial 66133-101 3N261R, Screened 66133-102 3N262R, Screened 66133-103 3N263R, Screened Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E.Walnut St., Garland, TX 75040 (972)272-3571 Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES MICROPAC.COM