Power Jumper HDTV Power Relocation Kit eTh In-wall HDTV Power Jumper Power Relocation cable is used to easily relocate power to your afl t panel mounted on the wall from a premise duplex powered receptacle nearby. eTh Power Jumper is prewired and requires no electrical wiring by the installer, and fastens to standard backless electrical NEMA formatted mounting devices. eTh Duplex Receptacle of the Power Jumper is installed behind the HDTV and the IEC end is located below in the same stud bay mounted on the wall. Use a standard right angle IEC power cord set (available from MIDLITE) and plug it into the IEC power inlet of the Power Jumper and plug the other end (NEMA 3 Prong Plug) into a remote surge protector or electrical receptacle nearby. MODEL: Part Number: PJ Y XR Y = Color (White = W, Black = B not yet available): XR = Length 7R = 7 ft., (custom lengths 8, 9, 10, 13, 15 feet or more). NEMA 5-15R Receptacle connected to a IEC 60320 CY14 power inlet. SPECIFICATIONS: Electrical Rating: 15 Amp, 125 Vac, 60Hz. Cable Type NM-B, 14-2 AWG. CODE AND RATING COMPLIANCY: UL 817, CSA 22.2 21 NEC Code: 250.146(D), Isolated Receptacles. Part No: PJW7R NEC Article 300.15 (E) Integral Enclosure and NEC 334.40 (B) Devices of Insulating Material and other NEC code requirements suitable for its intended application. Cable Type NM-B usage as defined in Article 334 of the NEC. * Multiple Patents Pending All Components are UL rated for its intended application. www.midlite.com Warehouse: 866 Warren Street, Fall River, MA 02721 Office Mail: PO Box 70189, No. Dartmouth, MA ph. 508.676.5169 toll free 800.606.5169 fax 508.861.0105X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for midlite products manufacturer: Other Similar products are found below : 212SWB GR2-WH 1GAL-GR1 1GIV-GR1 2GIV-GR2 GR1-BK DC1W DR2G-GR10-W 4642-W 2GSBK 2GBK-GR2 2GWH-GR2 1GSWH 1GBK-GR1 2GSWH 1GWH-GR1