MS5525DSO (Digital Small Outline) SPECIFICATIONS Integrated Digital Pressure Sensor ADC) (24-bit Fast Conversion Down to 1 ms A (standby < 0.15 A) Low Power, 1 Supply Voltage: 1.8 to 3.6V Pressure Range: 1 to 30 PSI 2 I C and SPI Interface The MS5525DSO is a new generation of Digital Small Outline 2 pressure sensors from MEAS with SPI and I C bus interface designed for high volume OEM users. The sensor module includes a pressure sensor and an ultra low power 24-bit ADC with internal factory calibrated coefficients. It provides a 24-bit digital pressure and temperature value and different operation modes that allow the user to optimize for conversion speed and current consumption. The MS5525DSO can be interfaced to virtually any microcontroller. The communication protocol is simple, without the need of programming internal registers in the device. This new sensor module generation is based on leading MEMS technology and latest benefits from TE proven experience and know-how in high volume manufacturing of pressure modules, which have been widely used for over a decade. The rugged engineered thermoplastic transducer is available in single and dual port configurations, and can measure absolute, gauge, compound, and differential pressure from 1 to 30psi. SENSOR SOLUTIONS ///MS5525DSO Page 1 09/2016 MS5525DSO (Digital Small Outline) FEATURES Small Outline IC Package Barbed Pressure Ports Low Power, High Resolution ADC Digital Pressure and Temperature Outputs APPLICATIONS Factory Automation Altitude and Airspeed Measurements Medical Instruments Leak Detection STANDARD RANGES (PSI) FS Pressure Absolute Gauge Differential 1 DB, SB, ST, DH,FT DB, SB,ST, DH 2 DB, SB, ST, DH,FT DB, SB,ST, DH 5 DB, SB, ST, DH,FT DB, SB,ST ,DH 15 DB, DH,FT DB, SB, ST, DH,FT DB, DH 30 DB, DH,FT DB, SB, ST, DH,FT DB, DH See Package Configurations: DB= Dual Barb, DH= Dual Hole, SB=Single Barb, ST=Single Tube, FT=Front Side Tube 09/2016 SENSOR SOLUTIONS ///MS5525DSO Page 2