TFT Board Capacitive TFT Board Capacitive is a display module featuring a capacitive touch panel. It can be connected to a development board equipped with the standardized universal display connector. TFT Board Capacitive display module is driven by the SSD1963, an integrated display driver from Solomon Systech, via the standard 8080 parallel interface. TFT Board Capacitive displays are produced in several display sizes, with more planned in the future. They all support up to 24-bit pixel format (up to 16 million colors), with good contrast ratio, and support for a multi-touch. TFT Board 3 Capacitive features a 3.5 display with the resolution of 320 x 240 pixels, and an active area of 70.08 x 52.56 mm TFT Board 4 Capacitive features a 4.3 display with the resolution of 480 x272 pixels, and an active area of 95.04 x 53.86 mm TFT Board 5 Capacitive features a 5 display with the resolution of 800 x 480 pixels, and an active area of 108 x 64.8 mm TFT Board 7 Capacitive features a 7 display with the resolution of 800 x 480 pixels, and an active area of 154.08 x 85.92 mm TFT Board Capacitive displays do not require any additional configuration. In most cases, the display module can be used as soon as it is connected to the development board, equipped with the universal display connector. Time saving embedded toolsGND Ground Power supply VCC SDA Touch Panel I2C Data Touch panel I2C Clock SCL GPO Display GPIO Touch panel interrupt INT D/C Display command/data Display reset tRST WR Display write Display chip select CS TE Display frame sync Display read RD D1 Display frame sync Data line D0 D3 Data line Data line D2 D5 Data line Data line D4 D7 Data line Data line D6 D9 Data line Data line D8 D11 Data line Data line D10 D13 Data line Data line D12 D15 Data line Data line D14 D17 Data line Data line D16 D19 Data line Data line D18 D21 Data line Data line D20 D23 Data line Data line D22 cRST Touch panel reset Display stand-by STB NC Not connected Touch panel wake-up WK TFT Board display connector