AN To PWM Click PID: MIKROE-4060 AN to PWM Click is a device that converts the value of the input analog signal with virtually any wave shape to a fixed frequency PWM voltage output, with a duty cycle proportional to the input voltage. It has a linear response, and by applying a signal with the voltage between -2.5V to +2.5V on its input, the Click board will generate a pulse width modulated (PWM) output voltage, with duty cycle ranging from 0% to 100%. AN to PWM click features very good linearity, covers a positive and negative input voltage range and it has good temperature stability. These features allow this device to be used in various voltage to frequency applications, such as AD conversion, inspection, test and measurement equipment, while it can also be used as the variable clock signal generator. AN to PWM Click board is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board comes as a fully tested product, ready to be used on a system equipped with the mikroBUS socket. Specifications Type Measurements Applications AD conversion, inspection, test and measurement equipment, while it can also be used as the variable clock signal generator. On-board modules OPA2365 Dual 50MHz, Low-Noise, Single- Supply Rail-to-Rail Operational Amplifier TLV3201 - 40-ns, microPOWER, push-pull output comparator, both from Texas Instruments. Key Features Very good linearity, covers a positive and negative input voltage range and it has good temperature stability Interface GPIO Compatibility mikroBUS Click board size S (28.6 x 25.4 mm) Input Voltage 5V Resources mikroBUS mikroSDK Click board Catalog Click boards Downloads TLV3201 datasheet OPA365 datasheet AN To PWM click 2D and 3D files AN To PWM click schematic AN To PWM click example on Libstock Powered by TCPDF (www.tcpdf.org)