RS485 5 Click PID: MIKROE-4156 The RS485 5 Click is a Click board equipped with the MAX485, low-power, slew-rate-limited transceiver for RS-485 and RS-422 communication, from Analog Devices. This device supports half-duplex RS-485 communication and can be used as an interface between the TTL level UART and the RS485 communication bus. Thanks to the low power consumption and reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, error-free data transmission up to 250kbps is suported. RS485 5 Click is perfectly suitable for EMI-Sensitive Applications, such as industrial-control local area networks, building automation, HVAC systems, and many more. RS485 5 Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board comes as a fully tested product, ready to be used on a system equipped with the mikroBUS socket. Specifications Type RS485 Applications Transceiver RS422/RS485 communication bus over UART interface for various automation systems, controllers, sensors and small embedded devices that can all share the same bus. On-board modules MAX485, low-power transceiver for RS-485 and RS-422 communication Key Features Transceiver draw between 120A and 500A of supply current when unloaded or fully loaded with disabled drivers. Driver is short- circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit. Interface GPIO,UART Compatibility mikroBUS Click board size S (28.6 x 25.4 mm) Input Voltage 5V Resources mikroBUS mikroSDK Click board Catalog Click boards Downloads RS485 5 click example on Libstock MAX1487-MAX491 datasheet RS485 5 click 2D and 3D files RS485 5 click schematic Powered by TCPDF (www.tcpdf.org)