SPI Isolator 3 Click PID: MIKROE-4651 SPI Isolator 3 Click is a compact add-on board that contains a digital isolator optimized for a serial peripheral interface. This board features the MAX14483, a 6-channel 3.75kVRMS digital galvanic isolator with a very low propagation delay on the SDI, SDO, and SCLK channels from Analog Devices. Besides a second enable control input, which allows MAX14483 to isolate multiple SPI devices, and an auxiliary channel available for passing timing or control signals from the master side to the slave side, the MAX14483 also possesses power monitors provided for both power domains to signal if the opposite side of the isolator is ready for operation. Thus, this Click board is suitable for general SPI-bus isolation and the industrial, process, and building automation, in programmable logic controllers, and many more. SPI Isolator 3 Click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board comes as a fully tested product, ready to be used on a system equipped with the mikroBUS socket. Specifications Type Isolators,SPI Applications Can be used for general SPI-bus isolation and the industrial, process, and building automation, in programmable logic controllers, and many more. On-board modules MAX14483 - 6-channel 3.75kVRMS digital isolator with a very low propagation delay on the SDI, SDO, and SCLK channels from Maxim Integrated Key Features Low power consumption, 6 isolated channels, low propagation delay on SCLK, SDI, and SDO lines, robust galvanic isolation of digital signals, shared interrupt feature, auxiliary channel for timing or control, and more. Interface SPI Compatibility mikroBUS Click board size M (42.9 x 25.4 mm) Input Voltage 3.3V or 5V,External Resources mikroBUS mikroSDK Click board Catalog Click boards Downloads SPI Isolator 3 click 2D and 3D files MAX14483 datasheet SPI Isolator 3 click schematic SPI Isolator 3 click example on Libstock Powered by TCPDF (www.tcpdf.org)