MIKROE-605 MikroElektronika

Manual mikroETH 100 All Mikroelektronikas development systems feature a large number of peripheral modules expanding microcontrollers range of application and making the process of program testing easier. In addition to these modules, it is also possible to use numerous additional modules linked to the development system through the I/O port connectors. Some of these additional modules can operate as stand-alone devices without being connected to the microcontroller. MikroElektronika Additional BoardmikroETH 100 The mikroETH 100 additional board is used to connect the microcontroller installed in some device to the Ethernet network. Key features: - IEEE 802.3 Compliant Fast Ethernet Controller - Integrated MAC and 10/100Base-T PHY - Hardware Security Acceleration Engines - 24-Kbyte Transmit/Receive Packet Buffer SRAM - Operating voltage range of 3.0V to 3.6V etc. Figure 1: mikroETH 100 with mode 5 activated How to connect the board The mikroETH 100 additional board is connected to the microcontroller in some device via pads CN1 and CN2. Connection with the Ethernet network is established via the RJ45 connector. Jumpers J1-J4 are used to select PSP mode (Parallel Slave Port interface), table 1. Position of jumpers J1-J4 PSP MODE 1 0 OFF 1 PSPCFG2, PSPCFG3, PSPCFG4 PSPCFG1 2 PSPCFG4 PSPCFG2, PSPCFG3 PSPCFG1 3 PSPCFG2 PSPCFG3, PSPCFG4 PSPCFG1 4 PSPCFG2, PSPCFG4 PSPCFG3 PSPCFG1 5 PSPCFG3 PSPCFG1, PSPCFG2 PSPCFG4 6 PSPCFG1, PSPCFG3 PSPCFG2 PSPCFG4 9 PSPCFG2, PSPCFG3 PSPCFG1 PSPCFG4 10 PSPCFG1, PSPCFG2, PSPCFG3 PSPCFG4 Table 1 MikroElektronika