Ultra High Dynamic Range Monolithic Ampliefi r LHA-1+ 50 0.05 to 6 GHz The Big Deal Ultra High IP3 Generic photo used for illustration purposes only Broadband High Dynamic Range without MCLP PACKAGE external Matching Components Product Overview LHA-1+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the LHA-1+, unlike competitive models, is well matched (input and output) over a broad frequency range without the need for external matching components. Lead finish is tin-silver over nickel. It is enclosed in a 3x3 mm MCLP package for low parasitic interface. Key Features Feature Advantages Broadband covering primary wireless communications bands: Broad Band: 0.05 to 6.0 GHz Cellular, PCS, LTE, WiMAX The LHA-1+ matches industry leading IP3 performance relative to device size and pow- er consumption. The combination of the design and E-PHEMT Structure provides en- Extremely High IP3 hanced linearity over a broad frequency range as evidence in the IP3 being typically 17 versus DC power Consumption dB above the P 1dB point. This feature makes this amplifier ideal for use in: 40 dBm typical at 2 GHz Driver amplifiers for complex waveform up converter paths Drivers in linearized transmit systems Secondary amplifiers in ultra High Dynamic range receivers No External Matching Components LHA-1+ provides Input and Output Return Loss of 10-21 dB up to 4 GHz without the need for Required any external matching components Low Noise Figure: 2.6dB typ. up to 4 GHz A unique feature of the LHA-1+ which separates this design from all competitors is the 3.4dB typ. up to 6 GHz low noise figure performance in combination with the high dynamic range. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 5Ultra High Dynamic Range Monolithic Ampliefi r 0.05-6 GHz Product Features High IP3, 40 dBm typ. at 2 GHz, 5V Gain, 14.1 dB typ. at 2 GHz, 5V High Pout, P1dB 22.7 dBm typ. at 2 GHz, 5V Generic photo used for illustration purposes only Low noise figure, 2.1 dB 2 GHz, 5V Usable to 4.0V LHA-1+ No external matching components required CASE STYLE: FG873 +RoHS Compliant Typical Applications The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Base station infrastructure Portable Wireless CATV & DBS MMDS & Wireless LAN LTE General Description LHA-1+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the LHA-1+ has well matched input and output over a broad frequency range without the need for external matching components. Lead finish is tin-silver over nickel. It has repeatable performance from lot to lot and is enclosed in a 3 x 3 mm MCLP package for low parasitic interface. INDEX ON TOP simplified schematic and pin description RF IN (1) RF-OUT RF-IN GND (2) and DC-IN GND(4) GND BOTTOM RF OUT and VIEW DC IN (3) Function Pin Number Description RF input pin. This pin requires the use of an external DC blocking capacitor chosen for RF IN 1 the frequency of operation. RF output and bias pin. DC voltage is present on this pin therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias RF-OUT and DC-IN 3 without loss of RF signal due to the bias connection, as shown in Recommended Ap- plication Circuit, Fig. 2 Connections to ground. Use via holes as shown in Suggested Layout for PCB Design GND 2,4 to reduce ground path inductance for best performance. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled REV. A to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp M151107 LHA-1+ Mini-Circuits TH/RS/CP/AM 201016 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 2 of 5