SURFACE MOUNT MMIC Dual Matched Amplifier PHA-11+ 50 .05 to 3 GHz THE BIG DEAL y Two matched amplifiers in one package y High IP3, +44 dBm at 0.8 GHz in push-pull configuration y Low supply voltage, 3 to 5V y Noise Figure, 1.8 at 0.8 GHz y Gain, 16 dB typ. at 0.8 GHz Generic photo used for illustration purposes only y P1dB, +22 dBm typ. at 0.8 GHz CASE STYLE: DL1020 a,b y May be used as replacement for WJ AH11 +RoHS Compliant y High IP2, +78 dBm at 0.8 in push-pull configuration The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications APPLICATIONS y CATV y FTTH y Optical networks y Base station infrastructure y Balanced amplifiers y 75 Ohm push-pull and balanced amplifiers PRODUCT OVERVIEW Mini-Circuits PHA-11+ is a dual matched wideband amplifier fabricated using advanced E-PHEMT* technology, offering high dynamic range (High IP3 and Low NF) for use in 50 and 75 ohm applications. Exceptionally high IP2 has been demonstrated in wideband 50 and 75 ohm amplifiers evaluation boards. Combining this with low noise figure to enable it for use in exceptionally high dynamic range amplifiers. KEY FEATURES Feature Advantages Broadband Covers Cable TV band and communication bands such as Cellular, Cable TV, PCS, WiMAX etc. Matched pair for use in exceptionally high IP3 and IP2 Typical gain match of 0.2 dB and phase match of 1.6 deg. enables it to be used in push-pull amplifiers. Outstanding IP2. amplifiers Ideal for suppressing unwanted intermods in the presence of multi carriers, which is common in present day communication High IP3, up to 43 dBm systems. Low Noise Figure: 1.8 dB Compare this to competitors, which in the range of 4-6 dB. Mini-Circuits amplifier improves the dynamic range. typical High P1dB: 22 dBm High P1dB enables the amplifier to operate in linear region in the presence of strong interfering signals. * Enhancement mode pseudomorphic High Electron Mobility Transistor. a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. The WJ part number is used for identification and comparison purposes only. REV. C ECO-010399 PHA-11+ MCL NY 211102 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com PAGE 1 OF 5SURFACE MOUNT MMIC Dual Matched Amplifier PHA-11+ 1 ELECTRICAL SPECIFICATIONS AT 25C, Zo=50 AND DEVICE VOLTAGE 5V, UNLESS NOTED (Specifications (other than Matching or where defined as push-pull) are for each of the two matched amplifiers in the package) Parameter Condition (GHz) Min. Typ. Max. Units Frequency Range 0.05 3.0 GHz 0.05 17.7 0.25 16.4 0.45 16.3 Gain dB 0.8 14.5 16.1 17.7 2.0 14.5 3.0 12.0 0.05 11.3 0.25 19.5 0.45 19.4 Input Return Loss dB 0.8 17.0 2.0 8.4 3.0 4.5 0.05 14.1 0.25 22.1 0.45 21.7 Output Return Loss dB 0.8 18.8 2.0 10.0 3.0 6.0 0.05 22.4 0.25 22.7 0.45 22.7 (2) Output Power 1 dB compression dBm 0.8 22.5 2.0 21.5 3.0 20.4 0.05 41.4 0.25 41.4 0.45 41.6 (6) Output IP3 dBm 0.8 37.0 41.5 2.0 42.9 3.0 41.8 0.05 1.8 0.25 1.8 0.45 1.8 Noise Figure dB 0.8 1.8 2.0 2.2 3.0 2.7 0.05 0.11 0.25 0.12 0.45 0.12 Amplitude dB Unbalance 0.8 0.12 0.6 2.0 0.22 3.0 0.25 Matching between A1, A2 0.3 0.05 0.25 0.31 0.51 0.45 Phase deg. Unbalance 0.8 1.0 5.0 2.0 1.6 2.0 3.0 Device Operating Voltage 4.8 5.0 5.2 V Device Operating Current (each amplifier) 110 146 180 mA Device Current Variation vs. Temperature 23 A/C Device Current Variation vs Voltage 0.053 mA/mV (7) Thermal Resistance, junction-to-ground lead 34 C/W www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com PAGE 2 OF 5