ULTRA HIGH DYNAMIC RANGE Monolithic Amplifier PHA-202+ 50 0.03 to 2.7 GHz THE BIG DEAL y Ultra High IP3, +46.1 dBm y Broadband High Dynamic Range without external Matching Components y Medium power, 1W y Excellent return loss over 15 dB Generic photo used for illustration purposes only y High IP3, 46.1 dBm typ. at 1 GHz CASE STYLE: DL1636 y Gain, 17.0 dB typ. at 1 GHz y High Pout, P1dB 30.4 dBm typ. at 1 GHz +RoHS Compliant y No external matching components required The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications APPLICATIONS y Base station infrastructure y CATV y LTE PRODUCT OVERVIEW The PHA-202+ (RoHS compliant) is a medium power amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the PHA-202+ has good input and output return loss over a broad frequency range without the need for external matching components and has demonstrated excellent reliability. It has repeatable performance from lot to lot and is enclosed in a 5mm x 6mm, 8 lead package for very good thermal performance. KEY FEATURES Feature Advantages Broadband covering primary wireless communications bands: Broad Band: 0.03 to 2.7 GHz Cellular, PCS, LTE The PHA-202+ matches industry leading IP3 performance relative to device size and power consumption. The combi- nation of the design and E-PHEMT Structure provides enhanced linearity over a broad frequency range as evidence in Extremely High IP3 the IP3 being typically 14-23 dB above the P1dB point. This feature makes this amplifier ideal for use in: Versus DC power Consumption y Driver amplifiers for complex waveform up converter paths 46 dBm typical at 1.0 GHz y Drivers in linearized transmit systems y Secondary amplifiers in ultra High Dynamic range receivers No External Matching Components Unlike competing products, Mini-Circuits PHA-202+ provides Input and Output Return Loss of over 15 dB up to 2 GHz Required without the need for any external matching components REV. A ECO-010399 PHA-202+ RS/GY/CP 211103 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com PAGE 1 OF 5ULTRA HIGH DYNAMIC RANGE Monolithic Amplifier PHA-202+ ELECTRICAL SPECIFICATIONS AT 25C, 50 OHMS, UNLESS NOTED 1 2 Vd=11V Vd=11V Condition Parameter Units (MHz) Min. Typ. Max. Typ. Frequency range 0.03 2.7 0.03-2.7 GHz 30 18.3 18.3 500 17.9 17.7 Gain 1000 17.0 16.8 dB 2000 13.2 14.7 16.1 14.3 2700 12.7 12.1 30 21.2 20.5 500 21.7 25.5 Input return loss 1000 19.5 28.6 dB 2000 20.3 17.7 2700 14.9 12.0 30 15.1 15.5 500 16.4 15.2 Output return loss 1000 19.4 15.7 dB 2000 22.5 19.1 2700 9.8 9.4 Reverse isolation 2000 23 23.3 dB 30 28.4 29.2 500 30.2 29.8 Output power 1dB compression 1000 30.4 29.8 dBm 2000 28.1 27.0 2700 25.7 25.2 30 51.0 50.3 500 48.5 48.8 3 Output IP3 1000 46.1 46.2 dBm 2000 43.2 41.7 2700 39.4 38.8 30 3.2 3.0 500 3.3 3.0 Noise figure 1000 3.5 3.3 dB 2000 4.4 4.3 2700 5.4 5.2 Device operating voltage 11 11 V Device operating current 350 416 335 mA 4 Device current variation vs. temperature 188.6 188.6 A/C 5 Device current variation vs voltage 0.0485 0.0485 mA/mV Thermal Resistance, junction-to-ground lead at 85C stage temp. 16.1 16.1 C/W 1. Measured on Mini-Circuits Characterization test board MB018. See Characterization Test Circuit (Fig. 1) 2. Measured on Mini-Circuits Application test board TB-962+. See Characterization Test Circuit (Fig. 2) 3. Tested at Pout=16dBm / tone. 4. (Current at 85C Current at -45C)/130 5. (Current at 11.5V-current - Current at 10.5V)/1000 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com PAGE 2 OF 5