SURFACE MOUNT MMIC Dual Matched Amplifier PHA-22+ 50 0.05 to 1.5 GHz THE BIG DEAL y Dual matched amplifier for push-pull & balanced amplifiers y High IP2 and IP3 y Gain, 16 dB typ. at 0.8 GHz y P1dB, +22 dBm typ. at 0.8 GHz y Low noise figure, 1.8 dB typ. at 0.8 GHz Generic photo used for illustration purposes only y Two matched amplifiers in one package a,b CASE STYLE: DL1020 y May be used as a replacement to WJ AH22 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications APPLICATIONS y CATV y FTTH y Optical networks y Base station infrastructure y Balanced amplifiers y 75 Ohm push-pull and balanced amplifiers PRODUCT OVERVIEW Mini-Circuits PHA-22+ is a dual matched wideband amplifier fabricated using advanced E-PHEMT technology, offering high dynamic range (High IP3 and Low NF) for use in 50 and 75 ohm applications. Exceptionally high IP2 has been demonstrated in wideband 50 and 75 ohm amplifiers evaluation boards. Combining this with low noise figure to enable it for use in exceptionally high dynamic range amplifiers. KEY FEATURES Feature Advantages Broadband Covers Cable TV band and communication bands such as Cellular, Cable TV, PCS, WiMAX etc. Matched pair for use in exceptionally Typical gain match of 0.2 dB and phase match of 1.6 deg. enables it to be used in push-pull amplifiers. Outstanding IP2. high IP2 amplifiers Ideal for suppressing unwanted intermods in the presence of multi carriers, which is common in present day communi- High IP3, up to 43 dBm cation systems. Low Noise Figure: 1.8 dB typical Compare this to the competitors, which is in the range of 4-6 dB. Mini-Circuits amplifier improves the dynamic range. High P1dB: 22 dBm High P1dB enables the amplifier to operate in linear region in the presence of strong interfering signals. a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. The WJ part number is used for identification and comparison purposes only. REV. C ECO-010399 M151107 PHA-22+ MCL NY 211103 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com PAGE 1 OF 3SURFACE MOUNT MMIC Dual Matched Amplifier PHA-22+ 1 ELECTRICAL SPECIFICATIONS AT 25C, Zo=50 AND DEVICE VOLTAGE 5V, UNLESS NOTED (Specifications (other than Matching or where defined as push-pull) are for each of the two matched amplifiers in the package) Parameter Condition (GHz) Min. Typ. Max. Units Frequency Range 0.05 1.5 GHz 0.05 17.7 Gain 0.8 14.5 16.1 17.7 dB 1.5 15.4 0.05 11.3 Input Return Loss 0.8 17.0 dB 1.5 11.7 0.05 14.1 Output Return Loss 0.8 18.8 dB 1.5 13.1 0.05 22.4 (2) Output Power 1 dB compression 0.8 22.5 dBm 1.5 22.5 0.05 41.4 (6) Output IP3 0.8 37.0 41.5 dBm 1.5 42.9 0.05 1.8 Noise Figure 0.8 1.8 dB 1.5 2.0 0.05 0.11 Amplitude Unbalance 0.8 0.12 0.6 dB 1.5 0.22 Matching between A1, A2 0.05 0.3 Phase Unbalance 0.8 1.0 5.0 deg. 1.5 1.6 Device Operating Voltage 4.8 5.0 5.2 V Device Operating Current (each amplifier) 110 146 180 mA Device Current Variation vs. Temperature 23 A/C Device Current Variation vs Voltage 0.053 mA/mV (7) Thermal Resistance, junction-to-ground lead 34 C/W MAXIMUM RATINGS (4) PUSH-PULL AMPLIFIER TYPICAL PERFORMANCE (3) Parameter Ratings TB-566-75+ (75) TB-566-50+ ( 50) Frequency (5) Operating Temperature -40C to 85C Gain Output IP3 Output IP2 Gain Output IP3 Output IP2 (GHZ) (dB) (dBm) (dBm) (dB) (dBm) (dBm) Storage Temperature -55C to 150C 0.05 14.2 45.0 79.0 15.2 45.0 82.0 (6) Operating Current at 5V 200 mA 0.25 13.7 43.0 79.0 13.8 45.0 84.0 (6) Power Dissipation 1000 mW 0.45 14.0 42.0 81.0 13.8 44.0 81.0 0.85 14.1 43.0 72.0 13.0 44.0 76.0 Input Power (CW) +24 dBm 1.20 13.8 40.6 78.0 12.0 43.0 72.0 DC Voltage (pads 5,8) 6V 1.30 13.5 40.3 78.0 -- -- -- (1) Measured on Mini-Circuits Test Board TB-561-22+ (characterization test circuit, Fig 1a. (2) Current increases at P1dB (3) Measured on evaluation boards (push-pull amplifiers) TB-566-50+ (50) and TB-566-75+ (75). See Characterization Test Circuit (Fig. 1b) (4) Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation. (5)Defined with reference to ground pad temperature. (6) Per single ended amplifier (7) jc= Junction Temperature-85C / Voltage X sum of current in A1 & A2 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com PAGE 2 OF 3