Wideband TSY-172LNB+ Monolithic Ampliefi r 50 0.03 to 1.7 GHz The Big Deal 2mm x 2mm Very wideband, 30 MHz 1.7 GHz Low NF over entire frequency band, 1.4 dB Low current and low voltage (2.7V and 7.7 mA) Internal bypass switching Suitable for low phase noise applications Product Overview TSY-172LNB+ (RoHS compliant) is an advanced Low Voltage, Low Current, Low Noise wideband Bypass amplifier fabricated using GaAs E-PHEMT technology offering extremely high dynamic range over a broad frequency range. It has integrated switches enabling users to bypass the amplifier. TSY is enclosed in a 8-lead 2 x 2 mm MCLP package for good thermal performance. Key Features Feature Advantages Ideal for a wide range of receiver applications including military, commercial wireless, Ultra-wideband: 30 MHz 1.7 GHz and instrumentation. Low Voltage & Low Current Ideal for Battery operates systems 2.7V & 7.7 mA High IP3 Provides enhanced linearity over broad frequency range under high signal conditions. 24.7 dBm typ at 1 GHz Bypass feature Unlike other amplifiers, insertion loss is low in Bypass mode. (For Bypass, both V DD Low insertion loss and Ve are set to 0V.) Saves space in dense system layouts. Low inductance, repeatable transitions, and Compact size: 2 x 2 x 1 mm excellent thermal contact. Low additive phase noise, typically Ideal for low phase noise synthesizer applications -155 dBc/Hz 10 KHz offset Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 5Wideband Monolithic Ampliefi r TSY-172LNB+ 50 0.03 to 1.7 GHz Product Features Wideband: 0.03-1.7 GHz Built-in Bypass switching Generic photo used for illustration purposes only Low Noise figure: 1.4 dB typ. CASE STYLE: MC1631-1 P1dB: +17.5 dBm typ. +RoHS Compliant Low current and low voltage (2.7V and 7.7 mA) The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Typical Applications Wireless Base Station Systems Test and Measurement Systems Multi-Band Receivers General Description TSY-172LNB+(RoHS compliant) is an advanced Low Voltage, Low Current, Low Noise wideband Bypass amplifier fabricated using GaAs E-PHEMT technology offering extremely high dynamic range over a broad frequency range. It has integrated switches enabling users to bypass the amplifier. TSY is enclosed in a 8-lead 2 x 2 mm MCLP package for good thermal performance. simplified schematic & pad description Ve 1 8 N/C 2 7 N/C N/C PADDLE RF-IN 1 3 6 RF-OUT 1 RF-IN 2 4 5 RF-OUT 2 & VDD Function Pad Number Description (See Figure 1) RF-IN 1 & RF-IN 2 3,4 RF-Input pads. Pad 4 is connected to Pad 3 via two 0.1F Capacitors RF-OUT 1 & RF-Output pads. 5,6 RF-OUT2 & VDD Pad 6 is connected to Pad 5 via 0.1F Capacitor. Enable Voltage pad. Ve is always connected to V For amplifier bypass, V & Ve DD. DD Voltage Enable (Ve) 1 should be turned OFF simultaneously. Connect to ground. Use via holes as shown in Suggested Layout for PCB Design Ground Paddle to reduce ground path inductance for best performance. N/C 2,7,8 No connection Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled REV. B to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp ECO-005768 TSY-172LNB+ Mini-Circuits GY/RS/CP 210219 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 2 of 5