Coaxial Low Noise Amplifier ZX60-3011+ 50 400 to 3000 MHz Features high dynamic range wide bandwidth, 400 to 3000 MHz low noise figure 1.5 dB typ. 1dB compression, +21 dBm medium IP3 Generic photo used for illustration purposes only reverse voltage connection protected CASE STYLE: GC957 over-voltage transient protected low cost Connectors Model protected by US patent 6,790,049 SMA ZX60-3011+ Applications +RoHS Compliant buffer amplifier The +Suffix identifies RoHS Compliance. See our web site LO amplifiers for mixers for RoHS Compliance methodologies and qualifications cellular PCN general purpose small signal Electrical Specifications at 25C Parameter Condition (MHz) Min Typ. Max. Units Frequency 400 3000 MHz 400-1000 1.4 2.5 1000-1700 1.5 2.5 Noise Figure dB 1700-2400 1.7 2.6 2400-3000 1.8 2.8 400-1000 12 15.0 1000-1700 11 13.5 Gain dB 1700-2400 9 11.5 2400-3000 7.5 10.0 400-1000 .70 1000-1700 1.0 Gain Flatness dB 1700-2400 1.0 2400-3000 .70 400-1000 19.5 21.5 1000-1700 19.5 21.5 Output Power at 1dB compression dBm 1700-2400 18.5 21.0 2400-3000 18.0 20.4 Output third order intercept point 31 dBm Input VSWR 1.7 :1 Output VSWR 400-3000 1.6 :1 DC Supply Voltage 12 V Supply Current 120 mA Maximum Ratings Parameter Ratings -40C to 85C Case Operating Temperature -40C to 60C ambient Storage Temperature -55C to 100C DC Voltage +6.5 V Min. to 15V Max. Input RF Power (no damage) +15 dBm Power Dissipation 1.12W Typ. at 12V 1 Other voltages available in the 6.5 to 20V range, please contact factory. Permanent damage may occur if any of these limits are exceeded. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. REV. G C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled ECO-000670 to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp ZX60-3011+ EDB030109 MCL NY Mini-Circuits 191118 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 3ZX60-3011+ Outline Drawing NOTE: When soldering the DC connections, caution must be used to avoid overheating the DC terminal. See Application Note. AN-40-010. inch Outline Dimensions ( ) mm A B C D E F G H J K L M N P Q R wt .74 .75 .46 1.18 .04 .17 .45 .59 .33 .21 .22 .14 1.00 .37 .18 .106 grams 23.0 18.80 19.1 11.68 30.0 1.02 4.32 11.4 14.99 8.38 5.33 5.59 3.56 25.40 9.40 4.57 2.69 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 2 of 3