by The Leading Enterprise Internet of Things Solution ALTA Wireless Control General Description Monnit ALTA wireless control units contain two separate relay switches allowing for individual control through the iMonnit online sensors portal. The ALTA control unit relays can be switched on/off ALTA Wireless Control Features manually through the software or automatically by any wireless sensor notification assigned to a Wireless range of 1,000+ feet through 12-14 walls * single sensor or group of sensors when a specified 900 MHz Frequency Hopping Spread Spectrum (FHSS) condition is detected. 868 and 433 MHz Frequency Agile Improved interference immunity Principle of Operation Encrypt-RF Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages) The ALTA control unit has two separate relays that 16,000 sensor message memory can be toggled on/off at will by either: (a) the iMon - Over the air updates (future proof) nit.com web portal (b) any device that triggers a Allows for automated control. notification on the same network. 10-amp or 30-amp units available. Two separate relays per unit. Four LED indicators let the user know if the Can be triggered by any Monnit wireless sensor device is powered on, communicating with the manually through the iMonnit software. online system and the status of each relay. AC powered, always on for immediate response from paired sensors. The user can manually turn a relay on or off through the iMonnit software. Manual changes * Actual range may vary depending on environment. are either: (a) temporary based on a set duration (ex. activate the relay for 10 minutes then return to Wireless Range Comparison Wireless Range Comparison the default state) (b) perpetuated indefinitely until overridden. Monnit ALTA Each of the units two relays can also be controlled automatically by any wireless sensor or group of sensors. Automatic relay switching can be triggered by setting the control parameters in a Monnit sensor notification from the system. The user can set the default state of each relay to on or off and user defined messages from sensors will cause the Other Wireless Platforms relay unit to switch to the non-default state. The relay switches back to its default state when the condition is no longer met. Wifi Example Use: If a water sensor detects water at a certain level in a sump pit, the relay will switch ON, activating the pump. When water is no longer Bluetooth detected, the relay will switch OFF, deactivating the pump motor. PAGE 1Applications Relay 1 Facilities / Building Operations Relay 2 Automated Systems TM Radio Smart Buildings LONG RANGE WIRELESS Power CONTROL Manufacturing Processes Machine Control Lighting Control Sump and Water Evacuation Agriculture and Greenhouses Monnit Wireless Control Unit Specifications Control Unit Relays 10-Amp Units 30-Amp Units Initial Contact Resistance Max. 100 m Max. 50 m Max Switching Power (resistive load) 2500VA 150W (NO) 8310VA (30A 277VAC) 1662VA 150W (NC) Max Switching Voltage 250 VAC, 100 VDC (0.5A) 277 VAC Max Switching Current 10A (AC), 5A (DC) 30A Nominal Operating Power 360 mW Approx 800 mW Operate Time (at nominal voltage / 20C) Max 10 ms Max 20 ms Release Time (at nominal voltage / 20C) Max 10 ms Max 10 ms Max Operating Speed 20 times/min 20 times/min (at nominal switching capacity) (at nominal switching capacity) Number of Relays 2 (individually controlled) Control Activation - Automatic based on sensor notification settings - Manual through iMonnit online software Input Power 5.5 VDC 900 mA Antenna Connector: SMA Gain (dBi): 3.0 Indicator Lights Four LED indicators - Power - Radio (RF) communication - Relay 1 status (On/Off) - Relay 2 status (On/Off) Enclosure ABS Plastic UL94V-0 flame rating Dimensions 5.5 x 3.355 x 1.25 in. (139.7 x 85.217 x 31.75 mm) Weight 8 ounces Wireless Range 1,000+ ft. non-line-of-sight *** Security Encrypt-RF (256-bit key exchange and AES-128 CTR) Operating Temperature -40 to +85 C (-40 to +185 F) Certifications: Industry Canada 900 MHz product FCC ID: ZTL- RFSC1 and IC: 9794A-RFSC1. 868 and 433 MHz product tested and found to comply with: CISPR 22:2008-09 / EN 55022:2010 - Class B and ETSI EN 300 220-2 V2.4.1 (2012-05). Note: Monnit control units require a Monnit wireless gateway for operation. PAGE 2 www.monnit.com 2017 Monnit Corp.