ThingMagic Micro High Performance, Multi-Protocol 2-Port, Embedded UHF RAIN RFID Module ThingMagic Micro is one of the smallest 2-port, multi-protocol, high performance embedded UHF RAIN RFID modules. ThingMagic Micro delivers the size, operating efficiency, power, and flexibility needed to embed UHF RFID into applications where small form factor is important. Its exceptionally small size and powerful performance yield increased efficiency, reduced development costs, and time-to-market advantages. 46 mm L x 26 mm W x 4.0 mm H ThingMagic Micro can read up to 750 tags per second and Features & Benefits: features low power consumption. Its wide RF output level range, from -10 to +30 dBm (1 W), allows it to be used in short range Small Form Factor Coupled printers or long range readers. Its antenna ports make it easy to with Powerful Performance embed into demanding applications. It is equipped with UART and USB 2.0 control/data interfaces. RF Power Output of +30 dBm Results in Tag Read Distance Over 9 ThingMagic Micro has flexible mounting options, with both edge Meters pads, for soldering the module directly to a motherboard and a Molex connector for board-to-board connections. The two RF Support for EPCglobal connections to the antennas can be made via edge pads or Gen2V2 (ISO 18000-63) U.FL connectors. Protocol Optional Protocols: ThingMagic Micro is supported by ThingMagic API. AEI ATA, IP-X and ISO 18000-6B Applications: Reads up to 750 Tags/ Second to Support Fast Handheld Devices and Scanners Moving Tags and Large Mobile/Portable Tag Populations Stationary Battery-operated Configured for Multiple Regions, such as FCC RFID-Enabled Printers, Desktop and Portable (North & South America), Tag Commissioning Stations ETSI (European Union), Point of Sale Devices and other Regions Smartphone Accessories including India, China, Korea, Australia and Japan ThingMagic Micro Ordering Information Module M6E-M Development Kit M6E-M-DEVKIT Physical Dimensions 46 mm L x 26 mm W x 4.0 mm H (1.8 in L x 1.0 in W x 0.16 in H) Tag / Transponder Protocols RFID Protocol Support EPCglobal Gen 2V2 (ISO 18000-63) with DRM. Optional AEI ATA, IP-X and ISO 18000-6B RF Interface Antenna Connector Two 50 connections (board-edge or U.FL) supporting two monostatic antennas Separate read and write levels, command-adjustable from -10 dBm to +30 dBm* in 0.5 dB steps, RF Power Output accurate to +/- 1 dBm Pre-configured for the following regions: FCC (NA, SA) 902-928 MHz ETSI (EU) 865.6-867.6 MHz TRAI (India) 865-867 MHz KCC (Korea) Regulatory 917-920.8 MHz ACMA (Australia) 920-926 MHz SRRC-MII (P.R. China) 920-925 MHz MIC (Japan) 916.8-923.4 MHz Open (Customizable channel plan 865-869, 902-928 MHz) Data/Control Interface 28 board-edge connections or Molex low prole connector (53748-0208) providing DC power, Physical communication, control and GPIO signals Control/Data Interfaces UART 3.3V logic levels 9.6 to 921.6 kbps / USB 2.0 interface (12 Mbps) GPIO Sensors and Indicators Two 3.3V bidirectional ports congurable as input (sensor) ports or output (indicator) ports API support C /.NET, Java, C Power DC Voltage: 3.5 to 5.25 V DC Power Required **DC power consumption RF level: 5.5 W +30 dBm*** 3.5 W +27 dBm 2.5 W +23 dBm 2.0 W 0 dBm Power Consumption when not transmitting 0.32 W Standby: 0.06 W Idle Power Saving Options Sleep: 0.008 W Shutdown: 0.0003 W Environment USA (FCC 47 CFR Ch. 1 Part 15) Canada (Industrie Canada RSS-21 0) EU (ETSI EN 302 208 v3.1.1, Certication RED 2014/53/EU) Operating Temp. -40C to +60C (case temperature) Storage Temp. -40C to +85C Shock and Vibration Survives 1 meter drop during handling Performance Max Read Rate Up to 750 tags/second using high-performance settings Max Tag Read Distance Over 9 meters (30 feet) with 6 dBi antenna (36 dBm EIRP) Specications subject to change without notice. *Duty cycle restrictions, based on temperature, apply at power levels above +23 dBm **Will operate below +3.5 V with reduced input line noise immunity ***Best case with good antenna matching ABOUT JADAK: JADAK, a business unit of Novanta, is a market leader in machine vision, RFID, barcode, printing, and color and light measurement products and services for original equipment manufacturers. The company designs and manufactures embedded detection and analysis solutions that help customers solve unique inspection, tracking, scanning and documenting. The company is ISO 9001 and ISO 13485 registered. Novanta is a trusted technology partner to OEMs in the medical and advanced industrial technology markets, with deep proprietary expertise in photonics, vision and precision motion technologies. ThingMagic is the JADAK line of RFID products. www.jadaktech.com Novanta 2018 Rev. 05082018