MNS2-9-IN-WS-WD-L03-WP Monnit

by The Leading Enterprise Internet of Things Solution Wireless Water Detection Sensors General Description Features of Monnit ALTA Sensors The ALTA Wireless Water Detection Sensor detects the Wireless range of 1,200+ feet through 12+ walls * presence or non-presence of water. Frequency-Hopping Spread Spectrum (FHSS) Improved interference immunity Improved power management for longer battery life ** Water Detection (12+ years on AA batteries) Encrypt-RF Security (Diffie-Hellman Key Exchange 3 ft leaded wires + AES-128 CBC for sensor data messages) Immediately detects water Datalogs 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power Principle of Operation cycle): - 10-minute heartbeats = ~ 22 days The ALTA Wireless Water Detection Sensor detects - 2-hour heartbeats = ~ 266 days when water is present by completing the circuit between Over-the-air updates (future proof) the two leaded wires. When water is present the sensor Free iMonnit basic online wireless sensor monitoring will immediately turn on the RF radio and transmit the and notification system to configure sensors, view data to the wireless gateway and iMonnit Online Sensor data and set alerts via SMS text and email Monitoring and Notification System, allowing the user to immediately receive an SMS text or email alert. The Actual range may vary depending on environment. * sensor can be configured to detect both the presence Battery life is determined by sensor reporting ** and non-presence of water. frequency and other variables. Other power options are also available. Applications Wireless Range Comparison Wireless Range Comparison Water heater monitoring Plumbing leak detection Monnit ALTA Sump monitoring Boat bilge monitoring Reservoir level monitoring Monnit Other Wireless Platforms Wifi Bluetooth PAGE 11.125 in Pinch and Pull (28.575 mm) To Change Battery 2.0 in (50.8 mm) CR2032 BATTERY 0.875 in (22.225 mm) ALTA Commercial Coin Cell Wireless Water Detection Sensor Technical Specifications Supply voltage 2.03.8 VDC * Current consumption 0.2 A (sleep mode), 0.7 A (RTC sleep), 570 A (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode) Operating temperature range (board circuitry and coin cell) -7C to +60C (20F to +140F) Optimal battery temperature range (coin cell) +10C to +50C (+50F to +122F) Lead wire length 3 ft (36 in) Detection wires High impedance Datalogging Datalogs 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle): - 10-minute heartbeats = ~ 22 days - 2-hour heartbeats = ~ 266 days Wireless range 1,200+ ft non-line-of-sight Security Encrypt-RF (256-bit key exchange and AES-128 CTR) Weight 0.7 ounces Certifications 900 MHz product FCC ID: ZTL-G2SC1 and IC: 9794A- G2SC1. 868 and 433 MHz product tested and found to Industry comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 Canada V3.1.1 (2017-02) and EN 60950 Circuits cannot withstand negative voltage. Please take care when installing batteries. * PinchPower Enclosures CR2032 BATTERY CR2032 BATTERY + Pinch Pull Press (press in on the sides) (sensor away from base) (sensor back into base) PAGE 2