by The Leading Enterprise Internet of Things Solution Wireless Water Rope Sensors General Description Features of Monnit ALTA Sensors The ALTA Wireless Water Rope Sensor detects the Wireless range of 1,200+ feet through 12+ walls * presence of water anywhere along the surface of Frequency-Hopping Spread Spectrum (FHSS) the rope. Sensor comes with 10 feet of water rope. Improved interference immunity Additional 10 ft sections are available and can be Improved power management for longer battery life ** connected up to 100 feet. (12+ years on AA batteries) Encrypt-RF Security (Diffie-Hellman Key Exchange + 10 ft lead and 10 ft water detection rope AES-128 CBC for sensor data messages) Immediately detects water anywhere along rope All ALTA sensors now have up to 3200 readings: Expandable up to 100 ft of detection rope - 10-minute heartbeats = 22 days - 2-hour heartbeats = 266 days Over-the-air updates (future proof) Free iMonnit basic online wireless sensor monitoring Principle of Operation and notification system to configure sensors, view data and set alerts via SMS text and email The ALTA Wireless Water Rope Sensor detects conductive liquids anywhere along the length of the detection rope by using two wires covered with Actual range may vary depending on environment. * conducting polymer. When water or conductive liquid Battery life is determined by sensor reporting ** contacts the rope, the sensor will immediately turn frequency and other variables. Other power options on the RF radio and transmit the data to the wireless are also available. gateway and iMonnit Online Sensor Monitoring and Notification System, allowing the user to immediately receive an alert by SMS text, email or voice call. The Wireless Range Comparison Wireless Range Comparison sensor rope dries quickly allowing the sensor to reset for next use. Detection rope can be expanded up to 100 feet by simply clicking additional 10 foot sections Monnit ALTA of detection rope together. Additional sections of water detection rope are available on the Monnit website. Monnit Example Applications Data center and server room water monitoring Other Wireless Platforms Document retention center monitoring Basement water monitoring Plumbing leak detection Boat bilge monitoring Wifi Storage monitoring Many additional applications Bluetooth PAGE 11.125 in Pinch and Pull (28.575 mm) To Change Battery 2.0 in (50.8 mm) CR2032 BATTERY 0.875 in (22.225 mm) ALTA Commercial Coin Cell Wireless Water Rope Sensor Technical Specifications Supply voltage 2.03.8 VDC * Current consumption 0.2 A (sleep mode), 0.7 A (RTC sleep), 570 A (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode) Operating temperature range (board circuitry and coin cell) -7C to +60C (20F to +140F) ** Optimal battery temperature range (coin cell) +10C to +50C (+50F to +122F) Water rope material PE + alloy lead Water rope maximum exposed temperature 75C (167F) Water rope weight 30g/meter Water rope pull force limit 60kg Water rope core resistance 3ohm/100 meters Water rope cable diameter 5.5mm Water rope cable length 10 ft (120 in) included (expandable to 100 ft) Water rope fire resistance Second pressure plenum cable Integrated memory Up to 3200 sensor messages Wireless range 1,200+ ft non-line-of-sight Security Encrypt-RF (256-bit key exchange and AES-128 CTR) Sensor Weight 0.7 ounces Certifications 900 MHz product FCC ID: ZTL-G2SC1 and IC: 9794A- Industry G2SC1. 868 and 433 MHz product tested and found to Canada comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950 Hardware cannot withstand negative voltage. Please take care when connecting a power device. * At temperatures above 100C, it is possible for the board circuitry to lose programmed memory. ** PinchPower Enclosures CR2032 BATTERY CR2032 BATTERY + Pinch Pull Press (sensor away from base) (sensor back into base) (press in on the sides) PAGE 2