by The Leading Enterprise Internet of Things Solution Wireless Accelerometer - Impact Detect Sensor General Description Features of Monnit ALTA Sensors The ALTA Wireless Accelerometer - Impact Detect Wireless range of 1,200+ feet through 12+ walls * Sensor is a digital, low-power, low-profile, capacitive Frequency-Hopping Spread Spectrum (FHSS) sensor that is able to measure acceleration on three Improved interference immunity axes to detect impact over a set g-force threshold. Improved power management for longer battery life ** (12+ years on AA batteries) Principle of Operation Encrypt-RF Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages) The ALTA Wireless Accelerometer - Impact Detect All ALTA sensors now have up to 3200 readings: Sensor activates when g-forces are exceeded by a user - 10-minute heartbeats = 22 days defined thresholdup to 8 g-force. The user can key in - 2-hour heartbeats = 266 days the desired threshold for the g-force trigger. This sensor Over-the-air updates (future proof) has two operation modes that can be also selected Free iMonnit basic online wireless sensor monitoring by the user: High Performance and Low Power. High and notification system to configure sensors, view Performance has an output data rate of 800 Hz with the data and set alerts via SMS text and email High-Pass Filter cutoff at 16 Hz while the Low Power has an output data rate of 12.5 Hz with the High-Pass Filter cutoff at 0.25 Hz. The data is displayed as Force Actual range may vary depending on environment. * Deteced or No Force Detected. Battery life is determined by sensor reporting ** frequency and other variables. Other power options Example Applications are also available. Impact Dection Impact Load Sensing Wireless Range Comparison Wireless Range Comparison Many additional applications Monnit ALTA High Performance/Low Power Comparison High Low Performance Power Output Data Rate 800 Hz 12.5 Hz Monnit Noise Normal Normal Oversampling Mode Low Power Low Power High-Pass Filter ON ON Other Wireless Platforms Dynamic Range 8 G 8 G High-Pass Filter Cutoff 16 Hz 0.25 Hz Wifi Transient Detection X,Y, & Z axis X,Y, & Z axis detection detection Dynamic Transient User Set, User Set, Threshold 0.063 G8.0 G 0.063 G8.0 G Bluetooth Dynamic Transient 0 0 Debounce Count PAGE 1Monnit Wireless Accelerometer Orientation (Commercial Coin Cell) 1.125 in Pinch and Pull (28.575 mm) To Change Battery Gravity + 2.0 in X (50.8 mm) CR2032 BATTERY 0.875 in + (22.225 mm) Y + Z ALTA Commercial Coin Cell Wireless Accelerometer - Impact Detect Technical Specifications Supply voltage 2.03.8 VDC * Current consumption 0.2 A (sleep mode), 0.7 A (RTC sleep), 570 A (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode) Operating temperature range (board circuitry and coin cell) -7C to +60C (20F to +140F) ** Optimal battery temperature range (coin cell) +10C to +50C (+50F to +122F) Sensitivity 4096 count/g Sensitivity range selections +/-2 G, +/-4 G, +/-8 G Measurement accuracy 2.5 % (force: X, Y, Z) Minimum g-force to turn on/wake up 0.0500.100 g Fastest update interval/heart rate in any configuration Heartbeat: 1 minute Bandwidth for data measurement 800 Hz Integrated memory Up to 3200 sensor messages Wireless range 1,200+ ft non-line-of-sight Security Encrypt-RF (256-bit key exchange and AES-128 CTR) Weight 0.7 ounces Certifications 900 MHz product FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. 868 Industry and 433 MHz product tested and found to comply with: EN 300 220-2 Canada V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950 Hardware cannot withstand negative voltage. Please take care when connecting a power device. * ** At temperatures above 100C, it is possible for the board circuitry to lose programmed memory. PinchPower Enclosures CR2032 BATTERY CR2032 BATTERY + Pinch Pull Press (sensor away from base) (sensor back into base) (press in on the sides) PAGE 2