MP1542DK-LF-Z Monolithic Power Systems

MP1542 700KHz/1.3MHz Boost Converter with a 2A Switch The Future of Analog IC Technology FEATURES DESCRIPTION 2A, 0.18 , 25V Power MOSFET The MP1542 is a current mode step up Uses Tiny Capacitors and Inductors converter with a 2A, 0.18 internal switch to Pin Selectable 700kHz or 1.3MHz Fixed provide a highly efficient regulator with fast Switching Frequency response. The MP1542 can be operated at Programmable Soft-Start 700kHz or 1.3MHz allowing for easy filtering Operates with Input Voltage as Low as 2.5V and low noise. An external compensation pin and Output Voltage as High as 22V gives the user flexibility in setting loop dynamics, 12V at 500mA from 5V Input which allows the use of small, low-ESR ceramic UVLO, Thermal Shutdown output capacitors. Soft-start results in small inrush current and can be programmed with an Internal Current Limit external capacitor. The MP1542 operates from Available in 8-Pin MSOP Packages an input voltage as low as 2.5V and can APPLICATIONS generate 12V at up to 500mA from a 5V supply. LCD Displays The MP1542 includes under-voltage lockout, Portable Applications current limiting and thermal overload protection Handheld Computers and PDAs preventing damage in the event of an output Digital Still and Video Cameras overload. The MP1542 is available in low profile 8-pin MSOP packages. For MPS green status, please visit MPS website under Quality Assurance. MPS and The Future of Analog IC Technology are Registered Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION Efficiency vs D1 V V Load Current IN OUT 3.3V 8V 95 90 85 6 5 80 7 IN SW 2 FSEL FB 75 3 OFF ON EN MP1542 70 8 1 SS COMP GND 65 4 60 C3 V = 3.3V 2.2nF IN 55 V = 8V OUT C4 50 10nF 1 10 100 1000 LOAD CURRENT (mA) MP1542 Rev. 1.5 www.MonolithicPower.com 1 6/22/2011 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2011 MPS. All Rights Reserved. EFFICIENCY (%)MP1542 700KHz/1.3MHz BOOST CONVERTER WITH A 2A SWITCH ORDERING INFORMATION Part Number* Package Top Marking Free Air Temperature (T ) A MP1542DK MSOP8 1542D -40 C to +85 C * For Tape & Reel, add suffix Z (eg. MP1542DKZ). For Lead Free, add suffix LF (eg. MP1542DKLFZ) PACKAGE REFERENCE TOP VIEW COMP 1 8 SS FB 2 7 FSEL EN 3 6 IN GND 4 5 SW (3) (1) Recommended Operating Conditions ABSOLUTE MAXIMUM RATINGS Supply Voltage V ........................... 2.5V to 22V IN SW ......................-0.5V (-1V for < 50ns) to +25V Output Voltage V ........................... 3V to 22V OUT IN ................................................-0.5V to +25V Maximum Junction Temp. (T )..................125C J All Other Pins...............................-0.3V to +6.5V (4) (2) Thermal Resistance JA JC Continuous Power Dissipation (T = +25C) A MSOP8 .................................. 150..... 65... C/W .0.83W Junction Temperature...............................150C Notes: Lead Temperature ....................................260C 1) Exceeding these ratings may damage the device. 2) The maximum allowable power dissipation is a function of the Storage Temperature............... -65C to +150 C maximum junction temperature. T(MAX) the junction-to- J ambient thermal resistance. and the ambient temperature, JA T the maximum allowable power dissipation at any ambient A temperature is calculated using: P (MAX)=(T (MAX)-T )/ . D J A JA Exceeding the maximum allowable power dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 3) The device is not guaranteed to function outside of its operating conditions. 4) Measured on JESD51-7, 4-layer PCB. MP1542 Rev. 1.5 www.MonolithicPower.com 2 6/22/2011 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2011 MPS. All Rights Reserved.