MP2603EJ-LF-P Monolithic Power Systems

MP2603 Single-Cell 150mA Linear Li-Ion Battery Charger The Future of Analog IC Technology FEATURES DESCRIPTION V Surge Up to 25V IN The MP2603 is a low cost single cell Li-ion 0.75% V Accuracy BATT battery charger IC suitable for low charge Low Battery Reverse Current, (< 1uA) current applications. It features constant current Programmable Charge Current (CC) and constant voltage (CV) charging Over Temperature Protection modes with programmable charge current Over Current Protection (50mA150mA), trickle charge and charge status indication. Charge Status Indication Over Charge Protection The MP2603 is enabled with an input supply No External Sense Resistor Required voltage greater than 3.5V. The charger IC is No External Reverse Blocking Diode Required disabled when unplugged from the AC adaptor. No Output Capacitor Required for Stability To minimize the chargers total solution cost, the MP2603 does not need an external reverse APPLICATIONS blocking diode, a precision current-sense Bluetooth Headset resistor or a compensation capacitor at the MP3 Players output. MP2603 is available in a 5-pin TSOT23 Mini PDAs package. Cell Phones EVALUATION BOARD REFERENCE Digital Cameras Board Number Dimensions All MPS parts are lead-free and adhere to the RoHS directive. For MPS green EV2603EJ-00B 1.4X x 1.1Y x 0.5Z status, please visit MPS website under Products, Quality Assurance page. MPS and The Future of Analog IC Technology are registered trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION 4 V 5 IN IN BATT To System 4.5V - 5.5V BATT MP2603 2 GND R PGM 1 3 IPGM CHGZ MP2603 Rev. 1.01 www.MonolithicPower.com 1 1/31/2013 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2013 MPS. All Rights Reserved. MP2603 SINGLE CELL 150mA LINEAR LI-ION BATTERY CHARGER ORDERING INFORMATION Part Number* Package Top Marking TSOT23 MP2603EJ M3 * For Tape & Reel, add suffix Z (e.g. MP2603EJZ). For RoHS compliant packaging, add suffix LF (e.g. MP2603EJLFZ) PACKAGE REFERENCE TOP VIEW IPGM 1 5 BATT GND 2 CHGZ 3 4 IN (4) (1) Thermal Resistance JA JC ABSOLUTE MAXIMUM RATINGS TSOT23 .................................220 .... 110.. C/W IN to GND .....................................-0.3V to +25V All Other Pins..............................-0.3V to +6.5 V Notes: (2) Continuous Power Dissipation (T = +25C) 1) Exceeding these ratings may damage the device. A 2) The maximum allowable power dissipation is a function of the ...........................................................0.57W maximum junction temperature T (MAX), the junction-to- J Junction Temperature...............................140C ambient thermal resistance , and the ambient temperature JA T . The maximum allowable continuous power dissipation at A Lead Temperature ....................................260C any ambient temperature is calculated by P (MAX) = (T D J Storage Temperature............... -65C to +150 C (MAX)-T )/ . Exceeding the maximum allowable power A JA dissipation will cause excessive die temperature, and the (3) regulator will go into thermal shutdown. Internal thermal Recommended Operating Conditions shutdown circuitry protects the device from permanent Supply Voltage V ......................4.75V to 5.25V IN damage. 3) The device is not guaranteed to function outside of its Operating Temperature.............. -20C to +85 C operating conditions. 4) Measured on JESD51-7, 4-layer PCB. MP2603 Rev. 1.01 www.MonolithicPower.com 2 1/31/2013 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2013 MPS. All Rights Reserved.