MP6205DN-LF-Z Monolithic Power Systems

MP6205 3.3V/5V, Single-Channel 500mA Current-Limited Power Distribution Switch The Future of Analog IC Technology DESCRIPTION FEATURES 500mA Continuous Current The MP6205 Power Distribution Switch features Accurate Current Limit internal current limiting to prevent damage to 2.7V to 5.5V Supply Range host devices due to faulty load conditions. The MP6205 Analog switch features 90m on- 140uA Quiescent Current resistance and operates from 2.7V to 5.5V input. 90m MOSFET It is available with a guaranteed current limit, Thermal-Shutdown Protection making it ideal for load switching applications. Under-Voltage Lockout The MP6205 has built-in protection for both 8ms FLAG Deglitch Time over current and increased thermal stress. For No FLAG Glitch During Power Up over current, the device will limit the current by Reverse Current Blocking changing to a constant current mode. MSOP8E Package As the temperature increases as a result of UL Recognized: E322138 short circuit, the device will shut off. The device APPLICATIONS will recover once the device temperature reduces to approx 120 C. Smartphone and PDA Portable GPS Device The MP6205 is available in MSOP8E package. Set-top-box USB Power Distribution MPS and The Future of Analog IC Technology are Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION +5V 1 GND MP6205 6, 7, 8 To V BUS 2, 3 OUT IN USB Ports 4 5 EN FLAG OFF ON SINGLE-CHANNEL UL Recognized Component MP6205 Rev. 1.01 www.MonolithicPower.com 1 1/20/2020 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2020 MPS. All Rights Reserved. MP6205 CURRENT-LIMITED POWER DISTRIBUTION SWITCHE ORDERING INFORMATION Maximum Maximum Short-Circuit Top Part Number* Enable Switch Continuous Package Temperature Current Marking Load Current T =25 C A Active Single 500mA 1100mA 40 C to +85C MP6205DH MSOP8E 6205D High * For Tape & Reel, add suffix Z (eg. MP6205DHZ). For RoHS Compliant Packaging, add suffix LF. (eg. MP6205DHLFZ) PACKAGE REFERENCE TOP VIEW GND 1 8 OUT IN 2 7 OUT IN 3 6 OUT EN FLAG 4 5 EXPOSED PAD ON BACKSIDE CONNECT TO GND MSOP8E (1) (2) ABSOLUTE MAXIMUM RATINGS Thermal Resistance JA JC MSOP8E .................................. 55 ...... 12 ... C/W IN .................................................. -0.3V to +6.0V EN, FLAG, OUT to GND .............. -0.3V to +6.0V Notes: Junction Temperature ............................... 150C 1) Exceeding these ratings may damage the device. Lead Temperature .................................... 260C 2) Measured on JESD51-7 4-layer PCB. Storage Temperature ............... 65C to +150C Operating Temperature ............. 40C to +85C MP6205 Rev. 1.01 www.MonolithicPower.com 2 1/20/2020 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2020 MPS. All Rights Reserved.