MP6515GF Monolithic Power Systems

MP6515 35V, 2.8A, Phase/Enable Control H-Bridge Motor Driver in QFN 3x4 and TSSOP-EP Packages The Future of Analog IC Technology DESCRIPTION FEATURES The MP6515 is an H-bridge motor driver. It Wide 5.4V to 35V Input Voltage Range operates from a supply voltage of up to 35V 2.8A Peak Output Current and delivers motor current up to 2.8A. Typically, Internal Full H-Bridge Driver the MP6515 is used to drive a DC brush motor. PHASE/ENABLE control, input logic For the MP6515, control of the outputs is (PHASE, EN, BRAKE, BMODE) accomplished through the PHASE, ENBL, Cycle-by-Cycle Current Regulation/Limit BRAKE, and BMODE pins. Low On Resistance (HS:250m LS:250m) An internal current sensing circuit provides an Simple, Versatile Logic Interfaces output with voltage proportional to the load 3.3V and 5V Compatible Logic Supply current. In addition, cycle-by-cycle current Over-Current Protection regulation/limiting is provided. These features Over-Voltage Protection do not require the use of a low-ohm shunt Thermal Shutdown resistor. Under-Voltage Lockout Fault Indication Output Internal safety features include over-current Thermally Enhanced Surface-Mount protection, input over-voltage protection, under- Package voltage lockout (UVLO), and thermal shutdown. The MP6515 is available in 16-pin APPLICATIONS 5.0mmx6.4mm TSSOP-EP and 3mmx4mm Solenoid Drivers QFN package with exposed thermal pad. DC Brush Motor Drive All MPS parts are lead-free, halogen free, and adhere to the RoHS directive. For MPS green status, please visit MPS website under Quality Assurance. MPS and The Future of Analog IC Technology are Registered Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION MP6515 Rev. 1.03 www.MonolithicPower.com 1 3/21/2019 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2019 MPS. All Rights Reserved. MP6515 35V, 2.8A, PHASE/ENABLE CONTROL, H-BRIDGE MOTOR DRIVER ORDERING INFORMATION Part Number* Package Top Marking TSSOP-16 EP (5.0mm 6.4mm) MP6515GF* See Below QFN-20 (3mm x 4mm) MP6515GL** See Below * For Tape & Reel, add suffix Z (e.g. MP6515GFZ) ** For Tape & Reel, add suffix Z (e.g. MP6515GLZ) TOP MARKING (TSSOP-16EP) MPS: MPS prefix YY: Year code WW: Week code MP6515: Part number LLLLLL: Lot number TOP MARKING (QFN-20) MP: MPS prefix Y: Year code W: Week code 6515: First four digits of the part number LLL: Lot number MP6515 Rev. 1.03 www.MonolithicPower.com 2 3/21/2019 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2019 MPS. All Rights Reserved.