SocketModem Cell
Embedded Cellular Modems
4G-LTE Models
BENEFITS
Approved by carriers and regulatory agencies saving
customers time, money, and protection from the risks
associated with pursuing their own certifications
Quick to market leveraging MultiTechs approvals
Interchangeable communications devices for easy
migration to future networks
Long solution lifecycle reduces redesign time and cost
The SocketModem Cellembedded cellular modem is a
Support from leading experts in IoT/M2M technology
FEATURES
complete, ready-to-integrate communications device ideal for
4G Models (Cat 4, Cat 1 and Cat M1)
customers looking to add 4G-LTE cellular communications to
4G Cat 4, Cat 1 Sprint and Cat M1 include GNSS
their IoT/M2M solutions. These communications devices enable
Universal Socket connectivity
easy technology transitions and allow developers to add wireless
Short Message Services (SMS)
Serial or USB interfaces
communication to products with a minimum of development
Serial interface supports speeds up to 921.6K bps
time and expense. The SocketModem Cell embedded cellular
AT command compatible
modems are carrier approved and end-device certified,
USB 2.0 HS compatible
decreasing time to market while saving customers money. Two-year warranty
YourDevices&Data ConnectingYourDevices Insight+Action+Control
Energy
Alerts
Financial/
Retail
Real-Time
Healthcare
Management
Remote
Wireless Asset
Monitoring
Service Management
Reports
Provider Platform
www.multitech.com/smcellHIGHLIGHTS
Power Saving Modes (Cat M1 Models)
Extended Discontinuous Reception (eDRX) mode increases the length of time the end device can sleep before it has to check in
with the network which saves power. Power Saving Mode (PSM) allows the device to notify the network it is going to sleep or
dormant indefinitely only waking up based on user defined timer. Once the device wakes up and transmits it will stay awake for
afewframesoftimeincasethenetworkneedstoreachthatdevice.AdeviceusingPSMtransmittingasmallamountofdataonce
perdaycouldlastmanyyearsusing2AAbatteries.(Note:Somepowersavingmodeswillbeavailableinafuturerfi mwarerelease.)
SPECIFICATIONS
MTSMC-L4N1 MTSMC-L4E1
Models
MTSMC-L4N1-U MTSMC-L4E1-U
LTE FDD Cat.4, LTE FDD Cat.4,
3GPP release 10 compliant 3GPP release 10 compliant
Performance (Category 4; (Category 4;
150 Mbps peak downlink/ 150 Mbps peak downlink/
50 Mbps peak uplink) with 3G Fallback 50 Mbps peak uplink) with 3G/2G Fallback
4G: B2(1900), B4(AWS1700), B5(850),
B12(700a), B13(700c), B14(700 FirstNet), 4G: B1(2100), B3(1800), B7(2600),
B66(AWS-3 1700), B71(600) B8(900), B20(800), B28A(700)
Frequency Bands (MHz)
AT&T: B2, B4, B5, B12, B14 3G: B1(2100), B3(1800), B8(900)
Verizon: B4, B13
2G: B3(1800), B8(900)
3G: B2(1900), B4(AWS1700), B5(850)
SMS Mobile Originate, Mobile Terminated and Cell Broadcast / PDU or Text Mode
USB USB 2.0 high speed compatible (-U Models)
TCP/IP Functions FTP, SMTP, SSL, TCP, UDP
Connectors Antenna : 3 UFL (Cellular, Rx Diversity/MIMO, GPS) / Mini SIM (2FF); 1.8V & 3V
Dimensions 3.15" x 1.375" (80.010 mm x 34.925 mm)
Serial Model @ 5VDC; Serial Model @ 5VDC;
4mA sleep, 20mA idle, 8mA sleep, 13mA idle,
615mA average at max power 747mA average at max power
Power Draw*
USB Model @ 5VDC; 21mA idle, USB Model @ 5VDC;
672mA average at max power 816mA average at max power
Input Power 3.3V 5VDC
Environmental
Operating Temperature -40 C to +85 C (-40 F to +185 F)
Storage Temperature -40 C to +85 C (-40 F to +185 F)
Relative Humidity 20% to 90% RH noncondensing
Certifications
FCC Part 15 Class B
EMC/Radio Compliance CE Mark, RED
FCC Part 22, 24, 27
UL 60950-1 2nd ED,
Safety IEC 60950-1 2nd ED
cUL 60950-1 2nd ED
Network PTCRB N/A
Carrier AT&T, Verizon N/A
* See device guides for additional information.
All future end-user (OEM) devices will and must go through FirstNet certification prior to being included in the FirstNet device ecosystem.