5600 Series www.murata-ps.com 10A Current Sensing Transformers SELECTION GUIDE Number of Inductance DC Terminating Resistance Order Code Turns Min. Resistance to Produce 1VOUT/1AIN 1Turn Pins 1&3 Pins 1&3, 56050C 50 4.5mH 1V, 50kHz 0.133 - 0.199 50 56100C 100 18mH 1V, 50kHz 0.93 - 1.40 100 56200C 200 72mH 1V, 10kHz 1.87 - 2.81 200 56300C 300 160mH 1V, 10kHz 5.73 - 8.59 300 56T100C 100CT 18mH 1V, 50kHz 0.93 - 1.40 100 FEATURES 56T200C 200CT 72mH 1V, 10kHz 1.87 - 2.81 200 56T300C 300CT 160mH 1V, 10kHz 5.73 - 8.59 300 RoHS compliant 50, 100, 200 & 300 Turn variants ABSOLUTE MAXIMUM RATINGS Operating free air temperature range -40C to 85C Primary current rating 10A Storage temperature range -40C to 125C 20kHz-200kHz frequency range 1 SOLDERING INFORMATION Centre tapped variants available Peak wave solder temperature 300C for 10 seconds Pin nish Tin DESCRIPTION The 5600 series of current sense transformers TECHNICAL NOTES are designed to monitor AC currents. They can ISOLATION VOLTAGE be used for high frequency current sensing, for All 5600 current sense transformers are tested at 500Vdc for a minimum of 1 second during our standard test example in switched-mode power supplies, motor procedure. control and electronic lighting ballasts. In addition, as part of our qualication process carried out prior to product launch, the 5600 series demonstrated no isolation breakdown at 10kVdc or 6kVac with a bare conductor as the primary winding. Whilst this does not imply these parts are designed for environments where such high voltages may be present, it does demonstrate the level of isolation voltage these products are able to withstand. Full mains safety isolation can be achieved with appropriately insulated wire on the primary winding. Specications typical at T = 25C A 1 For further information, please visit www.murata-ps.com/rohs For full details go to www.murata-ps.com/rohs www.murata-ps.com/support KMP 5600C C01 Page 1 of 256300C XYYWW 5600 Series 10A Current Sensing Transformers PACKAGE SPECIFICATIONS MECHANICAL DIMENSIONS RECOMMENDED FOOTPRINT DETAILS Schematic 16.79 (0.661) 12.70 (0.500) 1 2* 8.89 (0.350) 3 6.35 (0.250) 5.00 (0.197) x3 HOLES 0.065 (1.65) 0.059 (1.50) 0.10 (0.004) Unless otherwise stated, all dimensions in mm (inches) 0.25 (0.010). 12* 3 TUBE OUTLINE DIMENSIONS 11.20 (0.441) 0.600.15 (0.0240.006) 5.08 (0.200) 6.35 (0.250) 22.20 (0.874) 4.06 (0.160) 30.00 (1.181) 0.790.05 (0.0310.002) 12.70 (0.500) 2.100.25 (0.0830.010) 7.00 (0.276) Package weight: 5.7Typ. Tube length: 4752 18.7010.079 *Pin 2 is tted on 56TXXXC variants only. Unless otherwise stated, all dimensions in mm (inches) 0.25 (0.010). Arrow designates winding direction referenced to inner core surface. Tube quantity: 25 Unless otherwise stated, all dimensions in mm (inches) 0.25 (0.010). Tube material: Antistatic coated clear PVC Murata Power Solutions, Inc. Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other 11 Cabot Boulevard, Manseld, MA 02048-1151 U.S.A. technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specications are subject to change without ISO 9001 and 14001 REGISTERED notice. 2012 Murata Power Solutions, Inc. www.murata-ps.com/support KMP 5600C C01 Page 2 of 2 1.02 (0.040) 20.19 (0.795)