DLW5ATH111TQ2L Murata

Reference Only Spec. No. JEFL243C-9121A-01 P 1/10 Wire Wound Chip Common Mode Choke Coil DLW5ATHTQ2 Murata Standard Reference Specification AEC-Q200 1. Scope This reference specification applies to Wire Wound Chip Common Mode Choke Coil DLW5ATH TQ Series for Automotive Electronics based on AEC-Q200. 2. Part Numbering (ex.) DL W 5A T H 111 T Q 2 L (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (6) Impedance (Typ. at 100MHz) (1) Chip Common Mode Choke Coil (7) Circuit (2) Structure (W : Winding Type) (8) Features (3) Dimension (LW) (9) Number of Line (4) Type (10) Packaging Code L : Taping (180mm/reel) (5) Category K : Taping (330mm/reel) B : Bulk 3. Rating Impedance Impedance Rated DC at 10MHz, at 100MHz, Rated Withstanding Insulation ESD Current(*)(A) Customer MURATA Resistance Under Standard Under Standard Voltage Voltage Resistance Rank Part Number Part Number (Rdc) at at Testing Conditions Testing Conditions V(DC) V(DC) (M min.) 2.2kV (max.) 105 125 (+/-25%) (Typ.) DLW5ATH450TQ2L DLW5ATH450TQ2K 4.7 45 4.0 2.5 0.013 DLW5ATH450TQ2B DLW5ATH111TQ2L DLW5ATH111TQ2K 12 110 3.0 2.0 0.020 DLW5ATH111TQ2B DLW5ATH231TQ2L DLW5ATH231TQ2K 22 230 2.5 1.5 0.027 50 125 10 2 DLW5ATH231TQ2B DLW5ATH401TQ2L DLW5ATH401TQ2K 35 400 2.0 1.2 0.034 DLW5ATH401TQ2B DLW5ATH501TQ2L DLW5ATH501TQ2K 55 500 1.5 1.0 0.056 DLW5ATH501TQ2B (*)As for DLW5ATH TQ type Rated Current is derated as following figure depending on the operating temperature. Rated Current at 105 Rated Current at 125 125 105 Operating Temperature (Ambient temperature) Operating Temperature : - 40 C to + 125 C Storage Temperature : - 40 C to + 125 C MURATA MFG CO., LTD. Rated Current A Reference Only Spec. No. JEFL243C-9121A-01 P 2/10 4. Standard Testing Conditions < Unless otherwise specified > < In case of doubt > Temperature : Ordinary Temp. 15 C to 35 C Temperature : 20 C 2 C Humidity : Ordinary Humidity 25 %(RH) to 85 %(RH) Humidity : 60 %(RH) to 70 %(RH) Atmospheric pressure : 86 kPa to 106 kPa 5. Style and Dimensions 0.45 min. (T)2.200.15 0.5 min. (W)3.60.3 (L)5.00.3 1.70.3 1.30.3 1.70.3 : Electrode 1.30.3 1.30.3 in: mm 0.90.3 Equivalent Circuites Unit Mass (Typical value) 0.14g No polarity 6. Marking No marking. 7. Electrical Performance No. Item Specifications Test Method 7.1 Impedance Meet item 3. Measuring Equipment : KEYSIGHT 4191A or the equivalents. ( Z ) (at 10MHz) Measuring Frequency : 10MHz (ref. Item 9.) 7.2 Insulation Measuring Equipment : R8340A or the equivalents. Measuring voltage : Rated Voltage Resistance Time : within 60 s (ref. Item 9.) (I.R.) 7.3 DC Resistance Measuring Current : 100 mA max. (ref. Item 9.) (Rdc) (In case of doubt in the above mentioned standard condition,measure by 4 terminal method.) 7.4 Withstanding Products shall not be Test Voltage : 2.5 times for Rated Voltage Voltage damaged. Time : 1 to 5 seconds Charge Current : 1 mA max. (ref. Item 9.) MURATA MFG CO., LTD.