FDUE0640-H-R24M=P3 Murata

Reference Only Spec No.J(E)TE243B-0008E Type FDUE0640 Specifications Physical Dimensions Nextpage Tolerance : 0.3 Unit : mm Inductance ID 3 The nominal inductance value is identified by three digits. 1) 3 2 2 3 H 2 Three digits ID,First 2 digits indicate the effective inductance value The last digit indicates the number of0 following first 2 digits.The unit is H. 2) R 2 H R2 2 digits and letter ID,The unit is H. Letterrepresent the decimal point. Priority language Let a priority language be japanese.Spec No.J(E)TE243B-0008E Reference Only FDUE0640 Type Electrical specifications Inductance Nominal Tolerance Test DC Rated Current Rated Current Inductance Customer s Part No. Part No. Value Resistance Based on Based on marking Freq. 7% Inductance Change Temperature rise (m) (A) (Max.) (A) (Max.) () kHz FDUE0640-H-KR15M=P3 0.15 20 100 0.61 25 33 KR15 FDUE0640-H-R24M=P3 0.24 20 100 0.89 19 27 R24 FDUE0640-H-R42M=P3 0.42 20 100 1.48 15 22 R42 * Unless otherwise specified, measurement is the standard atmospheric conditions. 1 LCR 4284A 100kHz 0.5V Inductance Measured with a LCR meter 4284A(Agilent) or equivalent.Test Freq. 100kHzLevel 0.5V measurement point 2 34420A3541(HIOKI) DC Resistance (Picture-1 Measured with a Micro ohm meter 34420A(Agilent) or 3541(HIOKI) or equivalent. The measurement point of DCR is side of terminal. (refer to the Picture-1) Picture-1 3 Rated Current Value defined when DC current flows and Rated Current (Based on Inductance change) or when DC current flows and Rated Current (Based on Temperature rise) whichever is smaller. 20% Rated Current The saturation allowable DC current value is specified when the decrease of the initial Inductance value at 20%. (Based on Inductance change) 40 Rated Current Rated Current (Based on Temperature rise) is specified when temperature of the inductor on our PCB for test purpose is raised 40 by DC current. (Based on Temperature rise) 4 30V DC Absolute maximum voltage Absolute maximumvoltage30 DC.