FDV0530-H-1R0M=P3 Murata

Reference Only Spec No.J(E)TE243B-0023D Type FDV0530 Specifications Physical dimensions Lot Tolerance : 0.3 Marking(Black) Inductance ID Unit : mm Inductance ID 3 The nominal inductance value is identified by three digits. 1) 3 2 2 3 H 2 Three digits ID,First 2 digits indicate the effective inductance value The last digit indicates the number of0 following first 2 digits.The unit is H. 2) R 2 H R2 2 digits and letter ID,The unit is H. Letterrepresent the decimal point. Priority language Let a priority language be japanese.Spec No.J(E)TE243B-0023D Reference Only FDV0530 Type Electrical specifications Inductance Test DC Inductance Customer s Part No. Part No. Center Tolerance Resistance Rated Current Rated Current marking Freq. Value max. Based on Based on Inductance Change Temperature rise () kHz (m) (A) (Max.) (A) (Max.) FDV0530-H-R11M=P3 0.11 20 100 1.6 19.6 18.2 R11 FDV0530-H-R20M=P3 0.20 20 100 2.4 17.5 17.7 R20 FDV0530-H-R36M=P3 0.36 20 100 4.1 12.6 13.9 R36 FDV0530-H-R56M=P3 0.56 20 100 6.3 11.3 11.1 R56 FDV0530-H-R75M=P3 0.75 20 100 7.6 9.9 9.7 R75 FDV0530-H-1R0M=P3 1.0 20 100 11.2 8.4 7.7 1R0 FDV0530-H-1R5M=P3 1.5 20 100 15.5 5.7 6.6 1R5 FDV0530-H-2R2M=P3 2.2 20 100 19.9 5.3 6.0 2R2 FDV0530-H-3R3M=P3 3.3 20 100 34.1 4.1 4.5 3R3 FDV0530-H-4R7M=P3 4.7 20 100 53.6 3.5 3.6 4R7 1 LCR 4284A 100kHz 0.5V Inductance Measured with a LCR meter 4284A(Agilent) or equivalent.Test Freq. 100kHzLevel 0.5V 2 34420A3541(HIOKI) (Picture-1 DC Resistance Measured with a Micro ohm meter 34420A(Agilent) or 3541(HIOKI) or equivalent. The measurement point of DCR is side of terminal. (refer to the Picture-1) 3 Rated Current Value defined when DC current flows and Rated Current (Based on Inductance Change) measurement point or when current flows and Rated Current (Based on Temperature rise) whichever is smaller. 20% Picture-1 Rated Current The DC saturation allowable current value is specified when the decrease of the (Based on Inductance Change) nominal inductance value at 20%. 40 Rated Current Rated Current (Based on Temperature rise) is specified when temperature of the (Based on Temperature rise) inductor on our PCB for test purpose is raised 40 by DC current. 4 30V DC * Absolute maximum voltage Absolute maximumvoltage30 DC. Unless otherwise specified, measurement is the standard atmospheric conditions.