FDVE0630-H-4R7M=P3 Murata

Reference Only Type FDVE0630 Specifications Customer s Part No. Part No. Refer to the next page. Physical dimensions RoHS Comp. Marking refer next page. Halogen Free LOTNO Tolerance : 0.3 Unit : mm Inductance ID 3 The nominal inductance value is identified by three digits. 1) 3 2 2 3 H 2 Three digits ID,First 2 digits indicate the effective inductance value The last digit indicates the number of0 following first 2 digits.The unit is H. 2) R 2 H R2 2 digits and letter ID,The unit is H. Letterrepresent the decimal point. Priority language Let a priority language be japanese. FDVE0630FDVE0630 Reference Only FDVE0630 Type Electrical specifications Inductance Test DC Rated Current Rated Current Inductance Customer s Part No. Part No. Center Tolerance Freq. Resistance Based on Based on marking max. Inductance Change Temperature rise Value (m) (A) (Max.) (A) (Max.) () kHz FDVE0630-H-R16M=P3 0.16 20 100 1.6 19.4 20.7 R16 FDVE0630-H-R33M=P3 0.33 20 100 2.7 15.9 16.9 R33 FDVE0630-H-R47M=P3 0.47 20 100 3.7 15.6 14.1 R47 FDVE0630-H-R68M=P3 0.68 20 100 6.0 10.4 11.9 R68 FDVE0630-H-R75M=P3 0.75 20 100 6.2 10.9 10.7 R75 FDVE0630-H-1R0M=P3 1.0 20 100 8.5 9.5 9.5 1R0 FDVE0630-H-1R5M=P3 1.5 20 100 12.1 8.1 8.0 1R5 FDVE0630-H-2R2M=P3 2.2 20 100 16.2 6.9 6.6 2R2 FDVE0630-H-3R3M=P3 3.3 20 100 25.4 5.3 5.3 3R3 FDVE0630-H-4R7M=P3 4.7 20 100 36.1 4.6 4.4 4R7 FDVE0630-H-6R8M=P3 6.8 20 100 54.2 3.4 3.6 6R8 FDVE0630-H-100M=P3 10 20 100 79.2 3.1 2.8 100 1 LCR 4284A 100kHz 0.5V Inductance Measured with a LCR meter 4284A(Agilent) or equivalent.Test Freq. 100kHzLevel 0.5V 2 34420A3541(HIOKI) (Picture-1 DC Resistance Measured with a Micro ohm meter 34420A(Agilent) or 3541(HIOKI) or equivalent. The measurement point of DCR is side of terminal. (refer to the Picture-1) 3 measurement point Rated Current Value defined when DC current flows and Rated Current (Based on Inductance Change) or when current flows and Rated Current (Based on Temperature rise) whichever is smaller. Picture-1 30% ( 20) Rated Current The DC saturation allowable current value is specified when the decrease of the (Based on Inductance Change) initial inductance value at 30%.(The ambient reference temperature is 20 4020) Rated Current Rated Current (Based on Temperature rise) is specified when temperature of the inductor (Based on Temperature rise) is raised 40 by DC current. ( The ambient reference temperature is 20) 4 30V DC * Absolute maximum voltage Absolute maximumvoltage30 DC. Unless otherwise specified, measurement is the standard atmospheric conditions.