FDV0620-H-R47M=P3 Murata

Reference Only Spec No.J(E)TE243B-0025D Type FDV0620 Specifications Physical dimensions Nextpage Tolerance : 0.3 Unit : mm Inductance ID 3 The nominal inductance value is identified by three digits. 1) 3 2 2 3 H 2 Three digits ID,First 2 digits indicate the effective inductance value The last digit indicates the number of0 following first 2 digits.The unit is H. 2) R 2 H R2 2 digits and letter ID,The unit is H. Letterrepresent the decimal point. Priority language Let a priority language be japanese.Spec No.J(E)TE243B-0025D Reference Only FDV0620 Type Electrical specifications Inductance Test DC Inductance Customer s Part No. Part No. Center Tolerance Freq. Resistance Rated Current Rated Current marking Value max. Based on Based on Inductance Change Temperature rise (m) (A) (Max.) (A) (Max.) () kHz FDV0620-H-R20M=P3 0.20 20 100 4.5 16.2 12.4 R20 FDV0620-H-R47M=P3 0.47 20 100 8.3 11.0 9.0 R47 FDV0620-H-R68M=P3 0.68 20 100 10 10.0 7.7 R68 FDV0620-H-1R0M=P3 1.0 20 100 18 7.7 5.7 1R0 FDV0620-H-1R5M=P3 1.5 20 100 26 6.0 5.0 1R5 FDV0620-H-2R2M=P3 2.2 20 100 37 5.1 4.0 2R2 FDV0620-H-3R3M=P3 3.3 20 100 51 4.2 3.2 3R3 FDV0620-H-4R7M=P3 4.7 20 100 68 3.5 2.8 4R7 1 LCR 4284A 100kHz 0.5V Inductance Measured with a LCR meter 4284A(Agilent) or equivalent.Test Freq. 100kHzLevel 0.5V 2 34420A3541(HIOKI) (Picture-1 DC Resistance Measured with a Micro ohm meter 34420A(Agilent) or 3541(HIOKI) or equivalent. The measurement point of DCR is side of terminal. (refer to the Picture-1) 3 Rated Current Value defined when DC current flows and Rated Current (Based on Inductance Change) measurement point or when current flows and Rated Current (Based on Temperature rise) whichever is smaller. 20% Picture-1 Rated Current The DC saturation allowable current value is specified when the decrease of the (Based on Inductance Change) nominal inductance value at 20%. 40 Rated Current Rated Current (Based on Temperature rise) is specified when temperature of the (Based on Temperature rise) inductor on our PCB for test purpose is raised 40 by DC current. 4 30V DC * Absolute maximum voltage Absolute maximumvoltage30 DC. Unless otherwise specified, measurement is the standard atmospheric conditions.