HPR10XXC www.murata-ps.com 1.0 WATT UNREGULATED, SIP DC/DC CONVERTER FEATURES RoHS Compliant OBSOLETE PRODUCT Low Cost Last time buy: August 31, 2014. Single-in-line Package (SIP) Click Here For Obsolescence Notice of February 2014. DESCRIPTION Internal input and output ltering The HPR10XXC Series uses advanced circuit design and packaging technology to deliver superior reliability and Non-Conductive Case performance. A 170kHz push-pull oscillator is used in the input stage. Beat-frequency oscillation problems are reduced when using the HPR10XXC Series with high frequency isolation ampli ers. High Output Power Density: Reduced parts count and high ef ciency add to the reliability of the HPR10XXC Series. The high ef ciency of the 3 13 Watts/Inch HPR10XXC Series means less internal power dissipation, as low as 190mW. With reduced heat dissipation the HPR10XXC Series can operate at higher temperatures with no degradation. In addition, the high ef ciency of the Extended Temperature Range: 3 HPR10XXC Series means the series is able to offer greater than 13 W/inch of output power density. Operation -25C to +65C down to no load will not impact the reliability of the series, although a 1mA minimum load is needed to realize published speci cations. Ef ciency to 72% (Typical) The HPR10XXC Series provides the user low cost without sacri cing reliability. The use of surface mounted devices and advanced manufacturing technologies make it possible to offer premium performance and low cost. ELECTRICAL SPECIFICATIONS Speci cations typical at T = +25C, nominal input voltage, rated output current unless otherwise speci ed. A Nominal Input Rated Output Rated Output Input Current Re ected Ef ciency Model Voltage Voltage Current Ripple Current Recommended Alternatives No Load Rated Load mA mAp-p VDC VDC mA % HPR1000C 5 5 200 33 290 8 68 MER1S0505SC HPR1001C 5 12 83 33 290 8 69 MER1S0512SC HPR1004C 5 12 42 33 285 8 70 MEA1D0512SC HPR1005C 5 15 34 33 285 8 70 MEA1D0515SC HPR1018C 24 5 200 12 60 15 71 MER1S2405SC HPR1022C 24 12 42 12 58 15 72 MEA1D2412SC HPR1023C 24 15 34 12 58 15 72 MEA1D2415SC HPR1002C 5 15 67 33 285 8 70 NMR102C / MER1S0515SC HPR1003C 5 5 100 33 285 8 70 NMA0505SC / MEA1D0505SC HPR1006C 12 5 200 18 110 10 70 NMR106C / MER1S1205SC HPR1007C 12 12 83 18 107 10 71 NMR107C / MER1S1212SC HPR1008C 12 15 67 18 107 10 71 NMR108C / MER1S1215SC HPR1009C 12 5 100 18 107 10 71 NMA1205SC / MEA1D1205SC HPR1010C 12 12 42 18 107 10 71 NMA1212SC / MEA1D1212SC HPR1011C 12 15 34 18 107 10 71 NMA1215SC / MEA1D1215SC HPR1012C 15 5 200 15 96 10 70 MER1S1505SC HPR1013C 15 12 83 15 94 10 70 MER1S1512SC HPR1014C 15 15 67 15 94 10 71 MER1S1515SC HPR1015C MEA1D1505SC HPR1016C 15 12 42 15 94 10 71 MEA1D1512SC HPR1017C 15 15 34 15 94 10 71 MEA1D1515SC HPR1019C 24 12 83 12 60 15 71 MER1S2412SC HPR1020C 24 15 67 12 58 15 72 MER1S2415SC HPR1021C 24 5 100 12 58 15 72 MEA1D2405SC For full details go to www.murata-ps.com/rohs www.murata-ps.com/support TDC HPR10XXC.D02 Page 1 of 4 OBSOLETEHPR10XXC 1.0 WATT UNREGULATED, SIP DC/DC CONVERTER MECHANICAL FRONT Notes: All dimensions are in inches (millimeters). VIEW GRID: 0.100 inches (2.54 millimeters) RIGHT PIN PLACEMENT TOLERANCE: 0.015 SIDE HPR10XXC MATERIAL: Lead material is phosphor bronze nish is VIEW 100-300 micro-inches of matte tin over a barrier layer of 5-40 micro-inches of nickel. PIN CONNECTIONS 1. +VIN 2. -VIN BOTTOM 4. -VOUT 5. COM* VIEW 6. +VOUT * Common pin not present on single output models. COMMON SPECIFICATIONS Speci cations typical at T = +25C, nominal input voltage, rated output current unless otherwise speci ed. A PARAMETER CONDITIONS MIN TYP MAX UNITS INPUT Voltage Range 4.5 5 5.5 VDC 10.8 12 13.2 VDC 13.5 15 16.5 VDC 21.6 24 26.4 VDC Voltage Rise Time See Typical Performance Curves & Application Notes:Capacitive Loading Effects on Start-Up of DC/DC Converter ISOLATION Rated Voltage 1000 VDC Test Voltage 60 Hz, 10 Seconds 1000 Vpk Resistance 10 G Capacitance 25 100 pF Leakage Current V = 240VAC, 60Hz 2 8.5 Arms ISO OUTPUT Rated Power 1.0 W Voltage Setpoint Accuracy Rated Load, Nominal V 5 % IN Ripple & Noise BW = DC to 10MHz 100 mV p-p BW =10Hz to 2MHz 30 mVrms Voltage 1mA Load, V = 5V 7 VDC OUT 1mA Load, V = 12V 15 VDC OUT 1mA Load, V = 15V 18 VDC OUT Temperature Coef cent .01 %/Deg C REGULATION Line Regulation High Line to Low Line 1 %/%Vin Load Regulation (5V out only) Rated Load to 1mA Load 10 % Load Regulation (All other Models) Rated Load to 1mA Load 3 % GENERAL Switching Frequency 170 kHz Frequency Change Over Line and Load 24 % Package Weight 2 g MTTF per MIL-HDBK-217, Rev. E Circuit Stress Method Ground Benign T= +25C 3.8 MHr A Fixed Ground T= +35C 1.4 MHr A Naval Sheltered T= +35C 685 kHr A Airborne Uninhabited Fighter T= +35C 211 kHr A TEMPERATURE Speci cation -25 +25 +65 C Storage -50 +110 C * For demonstrated MTTF results reference Reliability Report HPR105 www.murata-ps.com/support TDC HPR10XXC.D02 Page 2 of 4