X-On Electronics has gained recognition as a prominent supplier of LME0505SC Isolated DC/DC Converters across the USA, India, Europe, Australia, and various other global locations. LME0505SC Isolated DC/DC Converters are a product manufactured by Murata. We provide cost-effective solutions for Isolated DC/DC Converters, ensuring timely deliveries around the world.

LME0505SC Murata

LME0505SC electronic component of Murata
Product Image X-ON
Product Image X-ON
Product Image X-ON

Images are for reference only
See Product Specifications
Part No.LME0505SC
Manufacturer: Murata
Category: Isolated DC/DC Converters
Description: Isolated DC/DC Converters 250mW 5V to 5V 50mA Single Output
Datasheet: LME0505SC Datasheet (PDF)
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)
N/A

Obsolete
Availability Price Quantity
0
MOQ : 1
Multiples : 1
1 : USD 12.1516
N/A

Obsolete
0
MOQ : 1
Multiples : 1
1 : USD 9.8658
5 : USD 9.2973
10 : USD 9.1232
20 : USD 9.0748
50 : USD 8.8232
N/A

Obsolete
0
MOQ : 4
Multiples : 1
4 : USD 8.3692
4 : USD 8.3692
15 : USD 8.3692
40 : USD 8.3692
100 : USD 8.3692
N/A

Obsolete
0
MOQ : 35
Multiples : 35
35 : USD 11.356
70 : USD 11.0685
140 : USD 10.781
210 : USD 10.4935
280 : USD 10.206
350 : USD 9.9185
3500 : USD 9.631
N/A

Obsolete
0
MOQ : 1
Multiples : 1
1 : USD 9.0861
N/A

Obsolete
0
MOQ : 1
Multiples : 1
1 : USD 10.6604
2 : USD 8.1255
7 : USD 7.691
N/A

Obsolete
0
MOQ : 35
Multiples : 35
35 : USD 6.877
1050 : USD 6.808
10500 : USD 6.7403
14000 : USD 6.6054
N/A

Obsolete
0
MOQ : 35
Multiples : 35
35 : USD 6.893
105 : USD 6.7551
N/A

Obsolete
0
MOQ : 1
Multiples : 1
1 : USD 10.018
5 : USD 9.2912
10 : USD 8.7234
25 : USD 7.8993
N/A

Obsolete
   
Manufacturer
Product Category
RoHS - XON
Icon ROHS
Output Power
Input Voltage Range
Input Voltage-nominal
Number of Outputs
Output Voltage-Channel 1
Output Current-Channel 1
Isolation Voltage
Mounting Style
Package / Case Size
Packaging
Product
Series
Brand
Factory Pack Quantity :
LoadingGif
 
Notes:- Show Stocked Products With Similar Attributes.

We are delighted to provide the LME0505SC from our Isolated DC/DC Converters category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the LME0505SC and other electronic components in the Isolated DC/DC Converters category and beyond.

Image Part-Description
Stock Image LME0512SC
Murata Power Solutions Isolated DCDC Converters 250mW SIP 5V12V Single Output
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image LME1209DC
Murata Power Solutions Isolated DCDC Converters 250mW 12V to 9V
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image LME1212DC
Murata Power Solutions Isolated DCDC Converters 250mW DIP 12V12V Single Output
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image LME0512DC
Isolated DC/DC Converters 250mW DIP 5V/12V Single Output
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image LME0515SC
Isolated DC/DC Converters 5-15V SIP 4 1/4W Single Output
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image LME1212SC
Isolated DC/DC Converters 250mW SIP 12V/12V Single Output
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image LME1215DC
Murata Power Solutions Isolated DCDC Converters 250mW DIP 12V15V Single Output
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image LME1215SC
Murata Power Solutions Isolated DCDC Converters 250mW DIP 12V15V Single Output
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image LME1205SC
Murata Power Solutions Isolated DCDC Converters 250mW SIP 12V5V Single Output
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image LPR2430ADK
Zigbee / 802.15.4 Development Tools 1mW 2.4GHz Dev Kit for LPR2430A Module
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Image Part-Description
Stock Image RM-0505S/HP
Isolated DC/DC Converters 0.25W DC/DC 2kV UNREG 5Vin 5Vout
Stock : 84
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image LME1205SC
Murata Power Solutions Isolated DCDC Converters 250mW SIP 12V5V Single Output
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image RM-1212SP
RECOM Power Isolated DCDC Converters 0.25W DCDC 1kV UNREG 12Vin 12Vout
Stock : 124
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image PEM2-S5-S12-S
Isolated DC/DC Converters dc-dc isolated, 2W, 4.5 5.5Vdc input, 12Vdc, 167mA, single unregulated output, SIP
Stock : 47
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image PEM2-S24-S5-S
Isolated DC/DC Converters dc-dc isolated, 2 W, 21.6~26.4 Vdc input, 5 Vdc, 400 mA, single unregulated output, SIP
Stock : 1469
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image PEM2-S24-S15-S
2 W, 1:1 Input Range, Single/Dual Unregulated Output, 7 Pin SIP, 3000 Vdc Isolation, High Temp Range, Dc-Dc Converter - ...
Stock : 22
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image PEM2-S12-S12-S
2 W, 1:1 Input Range, Single/Dual Unregulated Output, 7 Pin SIP, 3000 Vdc Isolation, High Temp Range, Dc-Dc Converter - ...
Stock : 246
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image PEM1-S24-D5-S
Isolated DC/DC Converters dc-dc isolated, 1 W, 21.6~26.4 Vdc input, 5 Vdc, 100 mA, dual unregulated output, SIP
Stock : 237
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image VLA106-24242
Isolated Module DC DC Converter 1 Output 24V 100mA 21.6V - 26.4V Input
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.

LME Series www.murata-ps.com Isolated 250mW Single Output DC-DC Converters SELECTION GUIDE Package Order Code Style V V mA % pF kHrs LME0505DC 5 5 50 70 29 2279 DIP LME0512DC 5 12 21 75 41 624 DIP LME0505SC 5 5 50 70 29 2279 SIP LME0509SC 5 9 28 75 37 1139 SIP LME0512SC 5 12 21 75 41 624 SIP FEATURES LME0515SC 5 15 16 75 40 357 SIP Single output rail LME1209DC 12 9 28 75 40 434 DIP LME1205SC 12 5 50 70 38 536 SIP 1kVDC isolation Hi Pot Test LME1212SC 12 12 21 75 43 330 SIP High efciency for low power applications LME1215SC 12 15 16 75 45 237 SIP SIP & DIP package styles Recommended Alternative 5V & 12V input LME0509DC 5 9 28 75 37 1139 DIP LME0509SC 5V, 9V, 12V & 15V output LME0515DC 5 15 16 75 40 357 DIP LME0515SC LME1205DC 12 5 50 70 38 536 DIP LME1205SC Internal SMD construction LME1209SC 12 9 28 75 37 1139 SIP LME1209DC No external components required LME1212DC 12 12 21 75 43 330 DIP LME1212SC LME1215DC 12 15 16 75 45 237 DIP LME1215SC MTTF up to 2.7 million hours Custom solutions available INPUT CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Pin compatible with CME, CRE1, NKE, Continuous operation, 5V input types 4.5 5.0 5.5 NME, NML, MEE1 & MEE3 series Voltage range V Continuous operation, 12V input types 10.8 12 13.2 PRODUCT OVERVIEW OUTPUT CHARACTERISTICS The LME series of DC-DC converters are opti- Parameter Conditions Min. Typ. Max. Units mised for low-power operation. They are ideally Rated Power TA=0C to 70C, See derating graph 0.25 W suited to generating a negative supply where only Voltage Set Point Accuracy See tolerance envelope a positive rail exists. Line regulation High VIN to low VIN 1.0 1.2 %/% 10% load to rated load, 5V output types 15 2 Load Regulation % 10% load to rated load, all other types 10 Ripple and Noise BW=DC to 20MHz, all output types 100 mV p-p ISOLATION CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Isolation test voltage Flash tested for 1 second 1000 VDC Resistance Viso= 500VDC 1 G GENERAL CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Switching frequency All input types 100 kHz ABSOLUTE MAXIMUM RATINGS Lead temperature 1.5mm from case for 10 seconds 260C Input voltage VIN, LME05 types 7V Input voltage VIN, LME12 types 15V 1. Calculated using MIL-HDBK-217F with nominal input voltage at full load. All specications typical at TA=25C, nominal input voltage and rated output current unless otherwise specied. For full details go to www.murata-ps.com/rohs www.murata-ps.com/support KDC LMEC.G02 Page 1 of 4 Nominal Input Voltage Output Voltage Output Current Efciency Isolation Capacitance 1 MTTFTypical Load Line LME Series Isolated 250mW Single Output DC-DC Converters TEMPERATURE CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Specication All output types 0 70 C Storage -50 130 Cooling Free air convection TEMPERATURE DERATING GRAPH TOLERANCE ENVELOPE +10% 0.375 +5% +2.5% V 70C NOM -2.5% 0.250 -7.5% Safe Operating 0.125 Area 125C 100 10 25 50 75 0 0 50 100 150 Output Load Current (%) Ambient Temperature (C) The voltage tolerance envelope shows typical load regulation characteristics for this product series. The toler- ance envelope is the maximum output voltage variation due to changes in output loading. TECHNICAL NOTES ISOLATION VOLTAGE Hi Pot Test, Flash Tested, Withstand Voltage, Proof Voltage, Dielectric Withstand Voltage & Isolation Test Voltage are all terms that relate to the same thing, a test voltage, applied for a specied time, across a component designed to provide electrical isolation, to verify the integrity of that isolation. Murata Power Solutions LME series of DC-DC converters are all 100% production tested at their stated isolation voltage. This is 1kVDC for 1 second. A question commonly asked is, What is the continuous voltage that can be applied across the part in normal operation For a part holding no specic agency approvals, such as the LME series, both input and output should normally be maintained within SELV limits i.e. less than 42.4V peak, or 60VDC. The isolation test voltage represents a measure of immunity to transient voltages and the part should never be used as an element of a safety isolation system. The part could be expected to function correctly with several hundred volts offset applied continuously across the isolation barrier but then the circuitry on both sides of the barrier must be regarded as operating at an unsafe voltage and further isolation/insulation systems must form a barrier between these circuits and any user-accessible circuitry according to safety standard requirements. REPEATED HIGH-VOLTAGE ISOLATION TESTING It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on materials, construction and environment. The LME series has toroidal isolation transformers, with no additional insulation between primary and secondary windings of enamelled wire. While parts can be expected to withstand several times the stated test voltage, the isolation capability does depend on the wire insulation. Any material, including this enamel (typically polyurethane) is susceptible to eventual chemical degradation when subject to very high applied voltages thus implying that the number of tests should be strictly limited. We therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be reduced by 20% from specied test voltage. This consideration equally applies to agency recognised parts rated for better than functional isolation where the wire enamel insulation is always supplemented by a further insulation system of physical spacing or barriers. RoHS COMPLIANT INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 260C for 10 seconds. The pin termination nish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are backward compatible with Sn/Pb soldering systems. For further information, please visit www.murata-ps.com/rohs APPLICATION NOTES Minimum Load The minimum load to meet datasheet specication is 10% of the full rated load across the specied input voltage range. Lower than 10% minimum loading will result in an increase in output voltage, which may rise to typically double the specied output voltage if the output load falls to less than 5%. www.murata-ps.com/support KDC LMEC.G02 Page 2 of 4 Output Power (W) Output Voltage

Tariff Desc

8504.40.90 POWER SUPPLIES, having BOTH:
(a) input voltages of 176V-246VAC, 47Hz-63Hz single phase OR 200V-230VAC, 50Hz-60Hz single phase
(b) multiple DC output voltages from minus 200 V to positive 200V
TC 9603032

8504.40.90 CHARGERS, ADAPTERS AND INVERTERS, AC/DC OR DC/DC OR DC/AC having ALL of the following:
(a) input voltage NOT less than 10V and NOT greater than 252V
(b) output voltage NOT less than 2V and NOT greater than 252V
(c) wattage NOT less than 40 W and NOT greater than 160W
(d) output current NOT greater than 17A - TC 1021920

8504.50.10 81
(a) designed for use with equipment of 8471
(b) for telecommunication apparatus of 8517 Free

8504.40.90 POWER SUPPLY UNITS, DC AND/OR AC output, complying with AS/NZS 60950 & AS/NZS CISPR 22, having ALL of:
(a) voltage NOT less than 2.5 V and NOT greater than 55V
(b) wattage NOT less than 0.02 W and NOT greater than 105W
(c) current output NOT less than 0.01 amp and NOT greater than 2.5amp
TC 1014564

8504.40.90 POWER SUPPLY MODULES having ALL of the following:
(a) input power at EITHER of the following voltages:
(i) 120VAC/240VAC
(ii) 24VDC /48VDC
(b) output power at EITHER of the following voltages:
(i) 5VDC, +15VDC, -15VDC, and 24VDC field I/O
(ii) 24VDC field I/O only
(c) circuitry monitors
(d) output adjusters
TC 9810001

8504.40.90 POWER SUPPLIES DC having BOTH:
(a) variable voltage NOT exceeding 30V
(b) maximum current output NOT exceeding 25amps
TC 9900597

8504.40.90 CONVERTERS, DC/DC, power output not exceeding 5W, being ANY of:
(a) single in line package
(b) dual in line
(c) surface mount device
TC 9601650

8543.90.20 20 Electronic microassemblies Free

8504.40.30 Static converters
(a) separately housed units, designed to be housed in the same cabinet as the central processing unit of equipment of 8471
(b) for telecommunication apparatus of 8517
60 No Electric current rectifying assemblies Free
63 No Other Free
MU2
MUP
MUR
MURATA
Murata - TOKO
Murata / IPDiA
Murata Electronics
Murata Electronics N
Murata Electronics North America
MURATA MANUFACTURING
Murata Manufacturing Co.
Murata Power Solutio
Murata Power Solutions
Murata Power Solutions Inc
Murata Power Solutions Inc.
Toko
TOKO AMERICA
Toko America Inc.
TOKO, Inc.
TOKYO PARTS INDUSTRIAL
Tokyo Parts Industrial Group
R15-2013-23-5230-WTL Industrial Relays by Relpol Retailers image

Dec 11, 2024
Discover the R15-2013-23-5230-WTL Industrial Relay by Relpol, available at Xon Electronics. This electromagnetic 3PDT relay features a 230VAC coil voltage and a robust switching capacity of 10A for 250VAC or 24VDC applications. Designed for industrial automation, motor control, and power systems, i
Comprehensive Guide to the GS9238-ATQ-R Datasheet by Xonelec image

Jul 4, 2024

Are you curious about the GS9238-ATQ-R datasheet by Xonelec and what it entails? You're in the right place! This article will take you on a journey through the intricate detail

Best RH02516R00FC02 Wirewound Resistors Retailer of India image

Sep 4, 2024
Discover why Xon Electronic is the top retailer of the RH02516R00FC02 Wirewound Resistor - Chassis Mount, a high-performance component by Vishay. Learn about its key features, including a 25-watt power rating, 16-ohm resistance, and 1% tolerance, and explore its applications in power supplies, moto
9005805.160 Automotive Fuses by Siba Retailer in India, USA image

Dec 17, 2024
Buy the 9005805.160 Automotive Fuse by Siba from Xon Electronic , the trusted global supplier of high-quality automotive components. This strip fuse, rated at 160A and 80VDC , ensures reliable protection for high-current automotive systems, electric vehicles, and power distribution networks.

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON Electronics
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronics Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing. All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted AS9120 Certified