LQH32NH6R8J23L Murata

Reference Only SpecNo.JELF243A-9146E-01 P1/9 CHIP COILCHIP INDUCTORSLQH32NH23L Murata Standard Reference SpecificationAEC-Q200 1. Scope This reference specification applies to Wire Wound Chip Coil (Chip Inductors) LQH32NH Series for Automotive Electronics based on AEC-Q200. 2. Part Numbering (ex) LQ H 32 N H 1R0 M 2 3 L Product ID Structure Dimension Applications Category Inductance Tolerance Features Electrode Packaging (LW) and L:Taping Characteristics 3. Rating Operating Temperature Range. -40 to +125C Storage Temperature Range. -40 to +125C Self Inductance DC Resistance Rated Customers MURATA Q Resonant ESD Current Tolerance Part Number Part Number Tolerance (min.) Frequency 5A : 8kV (H) () (mA) (%) (%) (MHz min.) LQH32NH1R0M23L 1.0 M:20 0.06 100 780 LQH32NH1R2J23L 1.2 0.07 90 720 LQH32NH1R5J23L 1.5 0.08 85 675 LQH32NH1R8J23L 1.8 0.09 80 635 LQH32NH2R2J23L 2.2 0.097 75 610 LQH32NH2R7J23L 2.7 0.15 70 495 25 LQH32NH3R3J23L 3.3 0.20 65 425 LQH32NH3R9J23L 3.9 0.14 60 510 LQH32NH4R7J23L 4.7 0.21 55 420 LQH32NH5R6J23L 5.6 0.32 50 335 LQH32NH6R8J23L 6.8 0.36 45 315 LQH32NH8R2J23L 8.2 0.40 40 300 LQH32NH100J23L 10 0.34 35 325 LQH32NH120J23L 12 0.50 30 270 LQH32NH150J23L 15 0.50 35 25 LQH32NH180J23L 18 0.64 235 LQH32NH220J23L 22 0.74 220 20 5A LQH32NH270J23L 27 J: 5 1.00 20 190 LQH32NH330J23L 33 1.14 175 LQH32NH390J23L 39 1.27 16 170 LQH32NH470J23L 47 1.46 15 155 LQH32NH560J23L 56 2.00 13 130 LQH32NH680J23L 68 2.25 12 125 LQH32NH820J23L 82 40 3.25 11 100 LQH32NH101J23L 100 3.65 95 10 LQH32NH121J23L 120 4.20 85 LQH32NH151J23L 150 4.85 8.0 80 LQH32NH181J23L 180 7.60 6.0 60 LQH32NH221J23L 220 8.45 5.5 LQH32NH271J23L 270 9.70 55 LQH32NH331J23L 330 11.0 50 5.0 LQH32NH391J23L 390 50 12.4 45 LQH32NH471J23L 470 14.1 40 LQH32NH561J23L 560 14.6 4.0 MURATA MFG.CO., LTD Reference Only SpecNo.JELF243A-9146E-01 P2/9 4. Testing Conditions Unless otherwise specified In case of doubt Temperature : Ordinary Temperature (15 to 35C) Temperature : 20 2C Humidity : Ordinary Humidity (25 to 85 %(RH)) Humidity : 60 to 70 %(RH) Atmospheric Pressure : 86 to 106 kPa 5. Appearance and Dimensions (No marking) No Marking. (in mm) Unit Mass (Typical value) 0.060 g 6. Electrical Performance No. Item Specification Test Method 6.1 Inductance Inductance shall meet item 3. Measuring EquipmentKEYSIGHT 4192A or equivalent Measuring Frequency1MHz / 1.0 to 390H 1kHz / 470 to 560H 6.2 Q Measuring EquipmentKEYSIGHT 4192A or equivalent Measuring Frequency1MHz / 1.0 to 82H 796kHz / 100 to 560 H 6.2 DC Resistance DC Resistance shall meet item 3. Measuring EquipmentDigital multi meter 6.3 Self Resonant S.R.F shall meet item 3. Measuring EquipmentKEYSIGHT E4991A or equivalent Frequency(S.R.F) 6.4 Rated Current Self temperaturer rise shall be The rated current is applied. limited to 20C max. Inductance Changewithin 10% 7. AEC-Q200 Requirement 7.1 Performance (based on Table 5 for Magnetics(Inductors / Transformer) AEC-Q200 Rev.D issued June. 1 2010 AEC-Q200 Murata Specification / Deviation No Stress Test Method 3 High 1000hours at 125 deg C Meet Table A after testing. Temperature Set for 24hours at room temperature, Table A Exposure then measured. Appearance No damage Inductance change Within 5% 4 Temperature Cycling 1000cycles Meet Table A after testing. -40 deg C to + 125deg C Set for 24hours at room temperature,then measured. MURATA MFG.CO., LTD