MYLSM00502ERPL Murata

MYLSM00502ERPL DC-DC converter Typical unit FEATURES PRODUCT OVERVIEW 4.5 - 17Vdc Input Voltage range MYLSM00502ERPL is Surface Mount type of DC-DC power (Absolute maximum input voltage:18Vdc) converter for embedded applications. Programmable output voltage range from 1 to 5.25Vdc The tiny form factor measures only 7.9 x 7.9 x 2.3 mm. Up to 2.5A of output current The wide input range is 4.5 to 17Vdc. Ultra small surface mount package The maximum output current of 2.5A. 7.9 x 7.9 x 2.3mm Based on Hi-frequency synchronous buck converter switching High efficiency 88% topology, the high power conversion efficient module features Short Circuit Protection programmable output voltage and On/Off control. On/Off control (Positive logic) This converter also include output short circuit protection. Operating Temperature range -40 to +85 degC SIMPLIFIDE APPLICATION MYLSM00502ERPL VIN VOUT RVAR EN VAR Co Vin Cin RL GND GND G-PAD Cin 10F/25V 1pcs Co 47F/6.3V 1pcs MYLSM00502ERPL DC-DC converter PERFORMANCE SPECIFICATIONS SUMMARY AND ORDERING GUIDE Output Input Efficiency Package Model Number Regulation Vo Io Power R/N Max. Vin typ. Range Iin, no load Iin, full load (%) (mm) (Vdc) (A,Max.) (W) (mV p-p) (Vdc) (Vdc) Typ.(mA) Typ.(A) Line (%) Load (%) MYLSM00502ERPL 1 - 5.25 2.5 13.1 30 2.0 2.0 12 4.5 - 17 10 1.25 88 7.9 x 7.9 x 2.3 1.Specification of R/N MAX. is at typical Input voltage, Vo = 1.0V and Io = 2.5A, +25degC. Output capacitor is 47uF ceramic capacitor. Input capacitors is 10uF ceramic capacitors. See detailed specifications. Input and output capacitors are necessary for our test equipment. 2. Specification of Regulation and Efficiency are at Io = 2.5A. 3.Use adequate ground plane and copper thickness adjacent to the converter. PART NUMBER STRUCTURE MY LSM 005 02 ERPL Murata products Internal Code Series Name Maximum Output Current Maximum Output Voltage PRODUCT MARKING Because of the small size of these products, the product marking contains a character-reduced code Layout to indicate the model number and manufacturing date code. Not all items on the marking are always used. Please note that the marking differs from the product photograph. Here is the layout of the Marking. AF Codes M Item Contents AF Product Code 1pin Lot No. (6-digit alphanumeric) M Manufacturer ID