MYMGC0R88RFLF2RV MonoBlock type POL, Low output 8A DC-DC converter series for core PRODUCT OVERVIEW The MYMGC0R88RFLF2RV is miniature Mono Block type non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measures Typical unit only 11.9x 15 x 2.4 mm. Applications include powering core FEATURES of FPGA/CPUs, datacom/telecom systems, Distributed Quick response to load change Bus Architectures (DBA), programmable logic and mixed voltage systems.The converters have input voltage ranges Ultra small surface mount package of 3.3 to 5.5Vdc and a low output voltage. Based on a fixed 11.9 15 2.4mm frequency synchronous buck converter switching topology, High efficiency of 81% this high power conversion efficient PoL module features Outstanding thermal derating performance On/Off control and Power Good signal output. Over current protection These converters also include under voltage lock out On/Off control (Positive logic) (UVLO), output short circuit protection and over-current Power Good signal protection. RoHS-10 hazardous substance compliance High Reliability / Heat Shock Testing 700cycle (-40 to +125degC) SIMPLIFIED APPLICATION Vout 1 Vin Sense1 C2 RL 100k ON/OFF Vin C1 GND C1 22F/10V 2pcs C2 22F/6.3V 5pcs PWGood nINT SDA SCL GND (Typical topology is shown. Murata recommends an external fuse.) MYMGC0R88RFLF2RV MonoBlock type POL, Low output 8A DC-DC converter series for core PERFORMANCE SPECIFICATIONS SUMMARY AND ORDERING GUIDE (Including series products) OUTPUT INPUT PACKAGE Efficiency Vout Power R/N typ Regulation(max) Vin nom Range Iin no load Iin full load ON/OFF PART NUMBER Iout (%) (mm) (Amps,max) (Vdc) (Watts) (% of Vout) Line(%) Load(%) (Vdc) (Vdc) (mA) (A) Yes MYMGC0R88RFLF2RV 0.85 8.0 6.80 1 +/-1.0 +/-1.0 5 3.3-5.5 101.9 1.67 81 11.9*15.0*2.4 (Positive) Yes MYMGC0R88RFLF2RVD 0.85 8.0 6.80 1 +/-1.0 +/-1.0 5 3.3-5.5 101.9 1.67 81 11.9*15.0*2.4 (Positive) 1.Please refer to the Part Number Structure for additional ordering information and options. 2.All specifications are at nominal line voltage, Vout=nominal and full load, +25degC unless otherwise noted. Output capacitors are 22uF*5, ceramic. Input cap is 22 uF*2 ceramic and plenty electrolytic capacitors. See detailed specifications. I/O caps are necessary for our test equipment. 3.Use adequate ground plane and copper thickness adjacent to the converter. PART NUMBER STRUCTURE MY MGC 0R8 8R F L F 2 R V D Murata products Terminal and Output Number Maximum Output Internal Code L:LGA,1 Output Current in Amps 8R:8.0A Dimention L Series Name Tape & Reel F:15D16 Output Voltage Input Voltage Range Range F:3.3-5.5V Height 0R8:0.85Vdc Blank:standard quantity 2:2T 3 D:small quantity Product Marking Because of the small size of these products, the Part Number Product Code product marking contains a character-reduced code MYMGC0R88RFLF2RV MGC0R88RFLV to indicate the model number and manufacturing MYMGC0R88RFLF2RVD MGC0R88RFLV date code. Not all items on the marking are always used. Please note that the marking differs from the product photograph. Here is the layout of the Marking. Layout (reference) Codes (reference) M MGC0R8 M C C 1Pin Marking 8RFLV MGC0R88RFLV Product code (Please see product code table beside) Internal Manufacturing code