NFL21SP507X1C3D Murata

Reference Only Spec. No. JENF243D-0006L-01 P 1/ 8 Chip EMIFIL LC Combined Monolithic NFL21SPX1C Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Monolithic Type NFL21S Series. 2. Part Numbering NF L 21 SP 106 X 1C 3 D Product ID Structure Dimension Features Cut-off Characteristics Rated Electrode Packaging Code (LW) Frequency Voltage (3,7 : Sn plating) (D : Taping / B : Bulk) 3. Rating DC Insulation Cut-off Inductance Rated Rated Withstanding Customer MURATA Capacitance Resistance Resistance Frequency (L) Current Voltage Voltage Part Number Part Number pF MHz nH max. mA(DC) M min. V(DC) V(DC) NFL21SP106X1C3D 10 67020% 68020% NFL21SP106X1C3B 8.5 100 NFL21SP206X1C7D 20 24020% 70020% NFL21SP206X1C7B NFL21SP506X1C3D 50 8420% 30520% 3.5 NFL21SP506X1C3B 150 NFL21SP706X1C3D 70 7620% 18520% 3.0 NFL21SP706X1C3B NFL21SP107X1C3D 100 4420% 13520% NFL21SP107X1C3B 2.0 200 1000 16 50 NFL21SP157X1C3D 150 2820% 12820% NFL21SP157X1C3B NFL21SP207X1C3D 200 2220% 7220% 1.5 250 NFL21SP207X1C3B NFL21SP307X1C3D 300 1910% 4510% NFL21SP307X1C3B NFL21SP407X1C3D 400 1610% 3410% 1.2 300 NFL21SP407X1C3B NFL21SP507X1C3D 500 1210% 3110% NFL21SP507X1C3B Operating Temperature : -55C to +125C (Includes self-heating.) Storage Temperature : -55C to +125C 4. Standard Testing Condition < Unless otherwise specified > < In case of doubt > Temperature : Ordinary Temp. / 15 C to 35 C Temperature: 20 C 2 C Humidity: Ordinary Humidity / 25 %(RH) to 85 %(RH) Humidity : 60 %(RH) to 70 %(RH) Atmospheric pressure: 86 kPa to 106 kPa 5. Style and Dimensions 0.30.2 0.30.2 Equivalent Circuit 0.60.2 1.250.1 Input Out put (1) (3) 0.40.2 GND 2.00.2 (2) (2) No Polarity (1) (3) :Electrode Unit Mass (Typical value) (in mm) (2) 0.250.2 0.009g MURATA MFG.CO., LTD. 1.250.1 0.850.1Reference Only Spec. No. JENF243D-0006L-01 P 2/ 8 Insertion Loss Characteristics (I.L.) (Typ.) 6. Marking No marking 7. Electrical Performance No. Item Specification Test Method 7.1 Capacitance Meet item 3. Frequency : 10.1MHz (Cap.) Voltage : 10.2V(rms) 7.2 Inductance Frequency (L) Cut-off Frequency 20~500MHz : 101MHz Cut-off Frequency 10MHz : 10.1MHz Voltage : 10.2V(rms) 7.3 DC Resistance Measured with 10mA max. (Rdc) Measured between terminal (1)-(3). (ref. Item5) 7.4 Insulation Voltage : Rated Voltage Resistance(I.R.) Time : 1 minutes max. 7.5 Withstanding Products shall not be damaged. Test Voltage : 50V(DC) Voltage Time : 1 to 5 s Charge Current : 50 mA max. 8. Mechanical Performance No. Item Specification Test Method 8.1 Appearance and Meet item 5. Visual Inspection and measured with Slide Dimensions Calipers. 8.2 Solderability Electrodes shall be at least 90% Flux : Ethanol solution of rosin, 25(wt)% covered with new solder coating. Pre-heat : 150 10C, 60 to 90s Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 240 3C Immersion Time : 31 s Immersion and emersion rates : 25mm / s 8.3 Resistance to Meet Table 1. Flux : Ethanol solution of rosin, 25(wt)% soldering heat Pre-heat : 150 10C, 60 to 90s Table 1 Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 270 5C Appearance No damaged Immersion Time : 10 1 s Cap. Change within 5% Immersion and emersion rates : 25mm / s L Change within 5% Then measured after exposure in the room I.R. meet item 3 condition for 242 hours. MURATA MFG.CO., LTD.