NFZ32BW621HZ10L Murata

Reference Only Spec No.JENF243J-9101A-01 P1/8 CHIP NOISE FILTER NFZ32BWHZ10 Murata Standard Reference SpecificationAEC-Q200 1.Scope This reference specification applies to Chip Noise Filter NFZ32BW HZ10 series for Automotive Electronics based on AEC-Q200 except for Power train and Safety. 2.Part Numbering (ex) NF Z 32 BW 3R6 H Z 1 0 L Numbers Product ID Structure Dimension Features Impedance Performance Category of Circuit Other Packaging (LW) L:Taping 3.Rating Operating Temperature Range (Ambient temperature Self-temperature rise is not included) -40 to +105C (Product temperature Self- temperature rise is included) -40 to +125C Storage Temperature Range. -40 to +125C Impedance DC Resistance *1 Rated Current(mA) at 1MHz Customer MURATA ESD Part Number Part Number 5A: 8kV *2 *3 () Tolerance ( ) Tolerance Ambient Ambient temperature temperature 85C 105C NFZ32BW3R6HZ10L 3.6 0.030 2550 1600 NFZ32BW7R4HZ10L 7.4 0.045 2050 1320 NFZ32BW9R0HZ10L 9.0 0.057 1750 1010 NFZ32BW150HZ10L 15 0.076 1600 970 NFZ32BW210HZ10L 21 0.12 1200 670 NFZ32BW320HZ10L 32 0.18 1000 530 NFZ32BW420HZ10L 42 0.24 850 510 NFZ32BW700HZ10L 70 0.38 30% 700 380 5A 20% NFZ32BW111HZ10L 110 0.57 520 320 NFZ32BW151HZ10L 150 0.81 450 240 NFZ32BW221HZ10L 220 1.15 390 190 NFZ32BW291HZ10L 290 1.78 310 140 NFZ32BW451HZ10L 450 2.28 275 120 NFZ32BW621HZ10L 620 2.70 250 110 NFZ32BW881HZ10L 880 4.38 200 80 *1: As for the rated current, rated current derated as figure.1 depending on the operating temperature. *2: When applied rated current to the Products, temperature rise caused by self heating will be 40C or less. *3: When applied rated current to the Products, temperature rise caused by self heating will be 20C or less. Rated Fugure. 1 Current at85 Rated Current at105 85 105 OperatingTemperature (Ambienttemperature) MURATA MFG.CO., LTD RatedCurrent mA Reference Only Spec No.JENF243J-9101A-01 P2/8 4. Testing Conditions Unless otherwise specified In case of doubt Temperature : Ordinary Temperature (15 to 35C) Temperature : 20 2C Humidity : Ordinary Humidity (25 to 85 %(RH) Humidity : 60 to 70 %(RH) Atmospheric Pressure : 86 to 106 kPa 5.Appearance and Dimensions 2.70.2 2.50.2 2.50.2 :2.8max. 3.20.3 Unit MassTypical value No marking. 0.044g (in mm) 0.90.31.30.2 0.90.3 6.Electrical Performance No. Item Specification Test Method 6.1 Impedance Impedance shall meet item 3. Measuring Equipment : KEYSIGHT 4192A or equivalent Measuring Frequency: 1MHz 6.2 DC Resistance DC Resistance shall meet item 3. Measuring Equipment: Digital multi meter 7. AEC-Q200 Requirement 7.1 Performance (based on Table 5 for Magnetics(Inductors / Transformer) AEC-Q200 Rev.D issued June. 1 2010 AEC-Q200 Murata Specification / Deviation No Stress Test Method 3 High 1000hours at 125 deg C Meet Table A after testing. Temperature Set for 24hours at room temperature, then Table A Exposure measured. Appearance No damage Impedance(at 1MHz) Within 10% DC Resistance Within 10% Change 4 Temperature Cycling 1000cycles Meet Table A after testing. -40 deg C to + 105deg C Set for 24hours at room temperature,then measured. 7 Biased Humidity 1000hours at 85 deg C, 85%RH Meet Table A after testing. unpowered. 8 Operational Life Apply Rated Current 85 deg C 1000 hours Meet Table A after testing. Set for 24hours at room temperature, then measured 9 External Visual Visual inspection No abnormalities 10 Physical Dimension Meet ITEM 5 No defects Style and Dimensions 12 Resistance Per Not Applicable to Solvents MIL-STD-202 Method 215 MURATA MFG.CO., LTD 1.550.15