NFZ32BW9R8HZ11L Murata

Reference Only Spec No.JENF243J-9102A-01 P1/8 CHIP NOISE FILTER NFZ32BWHZ11 Murata Standard Reference SpecificationAEC-Q200 1.Scope This reference specification applies to Chip Noise Filter NFZ32BW HZ11 series for Automotive Electronics based on AEC-Q200 except for Power train and Safety. 2.Part Numbering (ex) NF Z 32 BW 3R6 H Z 1 1 L Numbers Product ID Structure Dimension Features Impedance Performance Category of Circuit Other Packaging (LW) L:Taping 3.Rating Operating Temperature Range (Ambient temperature Self-temperature rise is not included) -40 to +105C (Product temperature Self- temperature rise is included) -40 to +125C Storage Temperature Range. -40 to +125C Impedance *1 Rated Current(mA) DC Resistance at 1MHz Customer MURATA ESD Part Number Part Number *2 *3 5A: 8kV Ambient Ambient () Tolerance () Tolerance temperature temperature 85C 105C NFZ32BW3R3HZ11L 0.024 2900 1490 3.3 NFZ32BW6R8HZ11L 0.036 2500 1380 6.8 NFZ32BW8R4HZ11L 0.048 2400 1360 8.4 NFZ32BW9R8HZ11L 9.8 0.053 2100 1110 NFZ32BW120HZ11L 12 0.064 1850 910 NFZ32BW190HZ11L 19 0.089 30% 20% 1800 900 5A NFZ32BW210HZ11L 21 0.100 1550 800 NFZ32BW310HZ11L 31 0.155 1200 610 NFZ32BW520HZ11L 52 0.220 1100 550 NFZ32BW650HZ11L 65 0.295 900 450 NFZ32BW101HZ11L 100 0.475 900 330 NFZ32BW151HZ11L 150 0.685 700 270 *1: As for the rated current, rated current derated as figure.1 depending on the operating temperature. *2: When applied rated current to the Products, temperature rise caused by self heating will be 40C or less. *3: When applied rated current to the Products, temperature rise caused by self heating will be 20C or less. Rated Fugure. 1 Current at85 Rated Current at105 105 85 OperatingTemperature (Ambienttemperature) MURATA MFG.CO., LTD RatedCurrent mA Reference Only Spec No.JENF243J-9102A-01 P2/8 4. Testing Conditions Unless otherwise specified In case of doubt Temperature : Ordinary Temperature (15 to 35C) Temperature : 20 2C Humidity : Ordinary Humidity (25 to 85 %(RH) Humidity : 60 to 70 %(RH) Atmospheric Pressure : 86 to 106 kPa 5.Appearance and Dimensions 2.70.2 2.50.2 2.50.2 2.8 3.20.3 Unit MassTypical value No marking. ( mm) (in mm) 0.044 0.90.3 1.30.2 0.90.3 6.Electrical Performance No. Item Specification Test Method 6.1 Impedance Impedance shall meet item 3. Measuring Equipment : KEYSIGHT 4192A or equivalent Measuring Frequency: 1MHz 6.2 DC Resistance DC Resistance shall meet item 3. Measuring Equipment: Digital multi meter 7. AEC-Q200 Requirement 7.1 Performance (based on Table 5 for Magnetics(Inductors / Transformer) AEC-Q200 Rev.D issued June. 1 2010 AEC-Q200 Murata Specification / Deviation No Stress Test Method 3 High 1000hours at 125 deg C Meet Table A after testing. Temperature Set for 24hours at room Table A Exposure temperature, then measured. Appearance No damage Impedance(at 1MHz) Within 10% DC Resistance Within 10% Change 4 Temperature Cycling 1000cycles Meet Table A after testing. -40 deg C to + 105deg C Set for 24hours at room temperature,then measured. 7 Biased Humidity 1000hours at 85 deg C, 85%RH Meet Table A after testing. unpowered. 8 Operational Life Apply Rated Current 85 deg C Meet Table A after testing. 1000 hours Set for 24hours at room temperature, then measured 9 External Visual Visual inspection No abnormalities 10 Physical Dimension Meet ITEM 5 No defects Style and Dimensions 12 Resistance Per Not Applicable to Solvents MIL-STD-202 Method 215 MURATA MFG.CO., LTD 1.550.15