SF2036E Low Insertion Loss L-Band SAW Filter 3.0 X 3.0 mm Surface-Mount Case Complies with Directive 2002/95/EC (RoHS) Pb 1880 MHz Absolute Maximum Ratings SAW Filter Rating Value Units Maximum Incident Power in Passband +10 dBm DC Voltage on any Non-ground Terminal 5 V Operable Temperature Range -45 to +125 C Specification Temperature Range -30 to +85 C Storage Temperature Range in Tape and Reel -40 to +85 C Maximum Soldering Profile, 5 Cycles Maximum 265 C for 10 s SM3030-6 Electrical Characteristics Characteristic Sym Notes Min Typ Max Units Center Frequency f 1880 MHz C Insertion Loss, 1850 to 1910 MHz IL 2.45 4.0 dB Amplitude Ripple, 1850 to 1910 MHz 1.2 2.5 dB P-P Attenuation Referenced to 0 dB: DC to 1660 MHz 20 32 dB 1660 to 1721 MHz 30 35 dB 1721 to 1800 MHz 20 37 dB 1930 to 1990 MHz 719 dB 2000 to 2040 MHz 25 37 dB 2040 to 2480 MHz 31 38 dB 3700 to 3820 MHz 25 35 dB Input/Output Return Loss, 1850 to 1910 MHz 7.4 13 dB Source Impedance Z 50 S Load Impedance Z 50 L Case Style SM3030-6 3 x 3 mm Nominal Footprint Lid Symbolization, Y=year, WW=week, S=shif 510 YWWS Electrical Connections Connection Terminals Input 2 Output 5 Ground All others CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. The design, manufacturing process, and specifications of this filter are subject to change. 5. US and international patents may apply. 6. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd. Copyright Murata Manufacturing Co., Ltd. All rights reserved. March 2014 SF2036E (R) 6/6/17 Page 1 of 5 www.murata.comCopyright Murata Manufacturing Co., Ltd. All rights reserved. March 2014 SF2036E (R) 6/6/17 Page 2 of 5 www.murata.com