ULS 60-Watt Series www.murata-ps.com Sixteenth-brick DOSA-Compatible, Isolated DC/DC Converters FEATURES n Small footprint DC/DC converter, ideal for high current applications Typical unit n Tiny 0.9 x 1.3 x 0.40 open frame package n Industry standard DOSAbric format and pinout with surface mount option PRODUCT OVERVIEW n 36-75 Volts DC input range The world of brick DC/DC converters has seen minimum load is required. For systems requiring a steady size reduction. The ULS series makes controlled startup/shutdown, an external remote n 2250 Volt Basic input/output isolation another dramatic size shrink down to a sixteenth- On/Off control may use a switch, transistor or digital (48V models) brick width (0.9 inches) while still retaining up logic. Remote Sense inputs compensate for resis- n Up to 66 Watts total output power with to 66Watt output and full 2250 Volt DC isolation. tive line drops at high currents. overtemperature shutdown The PC-board mount converter family accepts Many self-protection features on the ULS series 36to 75 Volts DC inputs and delivers fixed outputs avoid both converter and external circuit hazards. n High efficiency synchronous rectifier forward regulated to within 0.2%. The ULS converters These include input undervoltage lockout and topology are ideal for datacom and telecom applications, overtemperature shutdown. The outputs current n Stable no-load operation with no required cell phone towers, data centers, server farms and limit using the hiccup autorestart technique and external components network repeaters. the outputs may be short-circuited indefinitely. ULS outputs may be trimmed within 10% of Additional features include output overvoltage and n Operating temperature range -40 to +85C nominal output while delivering fast settling to reverse conduction elimination. with derating current step loads and no adverse effects from The synchronous rectifier forward topology yields n Certified to UL 60950-1, CSA-C22.2 No. 234, higher capacitive loads. Excellent ripple and noise high efficiency for minimal heat buildup and no EN60950-1 safety approvals, 2nd Edition specifications assure compatibility to circuits using fan operation. n Extensive self-protection shut down features CPUs, ASICs, programmable logic and FPGAs. No +SENSE (7) +Vin (1) +Vout (8) SWITCH CONTROL -Vout (4) -Vin (3) PULSE -SENSE TRANSFORMER INPUT (5) UNDER VOLTAGE, OVER TEMPERATURE, AND OUTPUT PWM OPTO REFERENCE OVER VOLTAGE Vout COMPARATORS CONTROLLER ISOLATION ERROR AMP TRIM (6) REMOTE ON/OFF CONTROL Typical topology is shown (2) Figure 1. Simplified Block Diagram For full details go to REG.-Nr D216. www.murata-ps.com/rohs www.murata-ps.com/support MDC ULS Series.C04 Page 1 of 24ULS 60-Watt Series Sixteenth-brick DOSA-Compatible, Isolated DC/DC Converters PERFORMANCE SPECIFICATIONS SUMMARY AND ORDERING GUIDE Output Input C76 Efficiency Package Root Model R/N (mV pk-pk) Regulation (max.) Vout Iout Power Vin Nom. Range Iin , no load Iin , full (V) (A, max.) (W) (V) (V) (mA) load (A) Typ. Max. Line Load Min. Typ. Case (inches) ULS-3.3/20-D48N-C 3.3 20 66 70 120 0.1% 0.2% 48 36-75 20 1.53 89% 90% 0.9x1.3x0.40 To Be Discontinued* ULS-5/12-D48N-C 5 12 60 50 80 0.125% 0.25% 48 36-75 40 1.39 88% 90% 0.9x1.3x0.40 ULS-12/5-D48N-C 12 5 60 80 120 0.125% 0.25% 48 36-75 50 1.37 88% 91% 0.9x1.3x0.40 Please refer to the Part Number Structure when ordering. electrolytic. These specifications are preliminar y. Contact Murata Power Solutions for availability. I/O caps are necessary for our test equipment and may not be needed for your application. Regulation specifications describe output voltage deviations from a nominal/midpoint value to either All specifications are at nominal line voltage and full load, +25 C unless otherwise noted. See extreme (50% load step). detailed specifications. Output capacitors are 1 F ceramic multilayer in parallel with 10 F *LAST TIME BUY: 4/1/2018. CLICK HERE FOR DISCONTINUANCE NOTICES. ULS-3.3/20-D48P-C ULS-3.3/20-D48P-Y ULS-5/12-D48PH-Y ULS-12/5-D48P-Y ULS-12/5-D48PH-Y ULS-3.3/20-D48PH-C ULS-5/12-D48P-Y ULS-5/12-D48PL2-C ULS-12/5-D48P-C ULS-12/5-D48PL2-C ULS-3.3/20-D48PH-Y ULS-5/12-D48P-C ULS-5/12-D48PM-C ULS-12/5-D48PH-C ULS-12/5-D48PM-C ULS-3.3/20-D48PM-C ULS-5/12-D48PH-C PART NUMBER STRUCTURE ULS - 3.3 / 20 - D48 N M H Lx - C RoHS Hazardous Substance Compliance (does not claim EU RoHS exemption 7blead in solder) C = RoHS-6 Y = RoHS-5 Sixteenth Brick Series Pin Length Option (Thru-hole only) Blank = Standard pin length 0.180 (4.6mm) L1 = 0.110 (2.79mm) L2 = 0.145 (3.68mm) Nominal Output Voltage: Conformal Coating: Blank = No coating, standard H = Coating added, optional special order* (not available on SMT models) Maximum Rated Output Current SMT Version Current in Amps Blank = Through-hole mount, no SMT M = Surface mount (MSL = 3) Input Voltage Range: On/Off Control Logic: D48 = 36-75 Volts (48V nominal) N = Negative P = Positive Special quantity order is required samples available with standard pin length only. SMT (M) versions not available in sample quantities. Some model number combinations may not be available. See website or contact your local Murata sales representative. Simplied Murata-PS logo Rev Product Label MODEL NAME As shown in figure 2, because of the small size of these products, the product labels contain a simplified Murata-PS logo and a character-reduced code to indicate the model Label 1 Figure 2. Label Artwork Layout number and manufacturing date code. Not all items on the label are always used. Please note that the label differs from the product photograph. REG.-Nr D216. Serial (4 digits) 0001 YYWW Date code Bar code: Data matrix Label 2 www.murata-ps.com/support MDC ULS Series.C04 Page 2 of 24