INTERNET DATA SHEET for Article Number 526100 MIRO 6.2 OPTO-COUPLER MODULE IN: 30 VDC - OUT: 48 VDC / 0,1 A / 500kHz Transistor 0.1 A 24 V DC Switching frequency: max. 500 kHz Spring clamp terminals Link to Product Illustration The information in this brochure has been compiled with the utmost care. Liability for the correctness completeness and topicality of the information is restricted to gross negligence. Version: 08/16 Murrelektronik GmbH Falkenstrae 3,71570 Oppenweiler Fon +49 (71 91) 47-0,Fax +49 (71 91) 47-491000 shop murrelektronik.com shop.murrelektronik.comINTERNET DATA SHEET for Article Number 526100 Product may differ from Image Approvals Input Voltage range ON 10...30 V DC Voltage range OFF 0...7 V DC Control current 5.5 mA LED display LED (yellow) General data Test isolation voltage 2.75 kV Housing Black plastic, flame retardant Mounting method DIN-rail mountable (EN 60715) Temperature range -20...+60 C Dimensions H W D 916.270 mm Output Switching voltage 5...48 V DC Switching current per output 0...0.1 A Saturation voltage (across output) max. 1.2 V AC/DC Leakage current (output is open) max. 250 A Switching time ON/OFF 0.4/0.1 s Switching frequency 500 kHz (ohmic) Commercial data country of origin CZ customs tariff number 85414090 EAN 4048879024372 The information in this brochure has been compiled with the utmost care. Liability for the correctness completeness and topicality of the information is restricted to gross negligence. Version: 08/16 Murrelektronik GmbH Falkenstrae 3,71570 Oppenweiler Fon +49 (71 91) 47-0,Fax +49 (71 91) 47-491000 shop murrelektronik.com shop.murrelektronik.com