MYD-Y7Z010/20 Development Board MYC-Y7Z010/20 CPU Module as Controller Board 1.27mm pitch 180-pin Stamp Hole Expansion Interface for Board-to-Board Connections 667MHz Xilinx XC7Z010 or XC7Z020 ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic 512MB DDR3 SDRAM (2 x 256MB, 32-bit) 4GB eMMC Flash, 16MB QSPI Flash USB Host, 3 x Gigabit Ethernet ports, RS232, RS485, CAN, TF, JTAG, GPIO Optional 4.3- or 7-inch LCD Module, WiFi Module, Camera Module and IO Extension Cape Ready-to-Run Linux 3.15.0 Figure 1-1 MYD-Y7Z010/20 Development Board Description The MYD-Y7Z010/20 development board is powered by Xilinx XC7Z020 (Zynq-7020) or XC7Z010 ( Zynq- 7010) SoC device. It is a cost-effective and high-performance solution for industrial application such as Industrial Ethernet, machine vision, PLC/HMI and etc. The board is ready to run Linux and supports industrial operating temperature ranging from -40 to +85 Celsius. The MYD-Y7Z010/20 development board employs the MYC-Y7Z010/20 as the controller board by populating the CPU Module on its base board through 1.27mm pitch 180-pin stamp-hole (Castellated-Hole) interface, allowing users to take the advantages of numerous extended out signals. Core components on CPU Module including Z-7010 or Z-7020 processor, 512MB DDR3 SDRAM, 4GB eMMC, 16MB QSPI Flash, Gigabit Ethernet PHY and external watchdog. Additionally, the MYD-Y7Z010/20 development board takes full features of the Z-7010 or Z- 7020 all programmable SoC to create a rich set of peripherals to the base board through headers and connectors including RS232, RS485, USB Host, three Gigabit Ethernet ports, CAN, TF card slot, JTAG as well as one 2.54mm pitch 2 x 25-pin expansion header to let more GPIOs available for further extension. 1 / 9 Figure 1-2 MYD-Y7Z010/20 Development Board MYIR has designed an IO expansion board MYD-Y7Z010/20 IO Cape to connect to the MYD-Y7Z010/20 development board via the 2.54mm pitch 2 x 25-pin expansion header to expand and enhances its functionality with added peripherals and signals including HDMI, Camera, LCD and Pmods. Figure 1-3 MYD-Y7Z010/20 IO Cape Figure 1-4 IO Cape Mounted on Development Board The 4.3- and 7-inch LCD Modules as well as MY-CAM011B camera module from MYIR can be supported through the MYD-Y7Z010/20 IO Cape. Optional USB Camera modules is also provided. With all these features, the MYD- Y7Z010/20 board is not only great for integration into custom design, but also can be used as a stand-alone development board for evaluating solutions based on Xilinx Zynq-7000. 2 / 9