MOD5282 Ethernet Core Module 100 Version with RJ-45 200 version with 10-pin header DATASHEET Key Points Use as a high-performance single board Customize with a development kit and begin computer or add Ethernet connectivity writing application code immediately to a new or existing design Industrial temperature range (-40C to 85C) Device Connectivity 10/100Mbps Ethernet 50 digital I/Os 2 3 UARTs, I C, CAN and SPI Eight 10-bit analog-to-digital converters (ADC) SD/MMC flash card ready 16-bit address and data bus with 3 chip selects Performance and memory 32-bit 66 MHz Processor 8MB SDRAM and 512KB Flash Companion development kit The following is available with the development kit: Customize any aspect of operation including web pages, data filtering, or custom network applications Development software: NB Eclipse IDE, Graphical debugger, deployment tools, and examples Communication software: TCP/IP stack, HTTP web server, FTP, E-mail, and flash file system System software: uC/OS RTOS, ANSI C/C++ compiler and linker The following optional software modules are not included with kit and are sold separately: SNMP Updated: October 2, 2014 Page 1 of 8 2014 NetBurner Inc. All Rights Reserved.MOD5282 Specifications Processor and Memory 32-bit Freescale ColdFire 5282 running at 66MHz with 8MB SDRAM, 512KB Flash, and 64Kb SRAM. Network Interface 10/100 BaseT with RJ-45 connector (100 Version) 10-pin header (200 Version) Data I/O Interface (J1 and J2) Up to 3 UARTs Up to 4 external timer in and up to 4 timer outputs Up to 50 digital I/O Up to 8 external general purpose timers Up to 6 PWM outputs ( via general purpose timers) Up to 4 external IRQs 2 Up to eight 10-bit analog-to-digital converters I C interface (ADC) with an input range of 0 - 5V SPI interface 16-bit address bus and 16-bit data CAN interface bus with 3 chip selects SD/MMC flash card ready Flash Card Support FAT32 support for SD Cards up to 8GB (requires exclusive use of SPI signals). Card types include SD/MMC (up to 2GB) and SDHC. Serial Configurations The UARTs can be configured in the following way: 3 TTL ports Add external level shifter for RS-232 Add external level shifter for RS-422/485 (up to two ports) Note: UART 0/1 also provides RTS/CTS hardware handshaking signals. LEDs Link and Speed (100 Version only, on RJ-45) Physical Characteristics Dimensions (inches): 2.60 x 2.00 Weight: 1 oz. Mounting Holes: 2 x 0.125 dia. Power DC Input Voltage (with Ethernet): 3.3V 380mA typical 3.3V 630mA max Environmental Operating Temperature -40 to 85 C RoHS Compliance The Restriction of Hazardous Substances guidelines ensure that electronics are manufactured with fewer envi- ronment harming materials. Updated: October 2, 2014 Page 2 of 8 2014 NetBurner Inc. All Rights Reserved.