URD21E334MTA-T/R Netech

MULTILAYER CERAMIC CAPACITORS EPOXY COATED RADIAL TYPE Application Construction NPOTemperature compensation type, have little or no change in capacitance with variation in temperature. Hence, they are used in radio-frequency oscillators, precision timing circuits, ultra stable amplifiers, etc. X7RTemperature stable type for by-pass and decoupling in radio and television receivers, computers servo systems. Audio tone, and coupling, etc., where moderate capacitance variations are permissible and dissipation factor is not critical. Z5U/Y5VGeneral type for by-pass and filtering applications. Part Number Designation: R15 Z 104 M 1H L 5 L Package-Lead-length SIZE T.C Capacitance-Code Tolerance Voltage Lead shape Lead space R15 N=NPO Two significant digits G= 2 1C=16V 1E=25V L=Straight 2=2.54 0.8 R=Tape/Reel R20 W=X7R NO. of zeros. 1H=50V 1J=63V Y=Inside B=Tape/Box J= 5 5=5.08 0.8 R25 Z=Z5U 2A=100V 2E=250V Crimp 6=61mm Example K= 10 (mm) Y=Y5V 2H=500V 3A=1KV H=High 102=1000pf L=25.4mm(min) M= 20 3D=2KV 3F=3KV seated 223=22000pf Z=+80/-20 104=100000pf 1. LEAD SHAPE R15 R20 R25 L Y L R15 R20 H H 12 MULTILAYER CERAMIC CAPACITORS EPOXY COATED RADIAL TYPE 2. LEAD SPACE (F) 3. LEAD LENGTH (L) CODE LEAD SPACE (mm/inch) CODE LEAD LENGTH REMARK 2.54 0.8 0.1 0.032 6mm1mm Specified lead length 2 6 5.08 0.8 0.2 0.032 25.4mm (min) upon request. 5 L 4. BODY SIZE & DIMENSION Capacitance Range Dimensions (mm) Size Lead style code available NPO X7R Z5U Y5V H max W max T max. d 0.05 F 0.08 P 50V: 50V: 50V: L 3.8 3.8 2.5 0.5 2.54 --- 0.47-4700pF 220pF-0.1uF 0.01-0.33uF 50V: R15 0.01uF-0.22uF 100V: 100V: 25V: 3.8 3.8 2.5 0.5 5.08 2.0 H 0.47-2700pF 220pF-0.1uF 0.47-1.0uF 25V: 25V: 16V: 0.12-0.47uF 1.0-2.2uF 10-22uF 5.0 6.0 3.0 0.5 2.54 2.0 Y 50V: 50V: 50V: 25V: R20 5600pF-0.01uF 0.1-1.0uF 2.2-4.7uF 0.22uF-1.0uF 100V: 100V: 50V: 5.0 6.0 3.0 0.5 5.08 2.0 H 2700-6800pF 0.1-0.15uF 0.47-2.2uF 16V: 47uF 25V: 0.1uF 100V: 100V: R25 L 25V: 22uF 6.5 6.5 4.0 0.5 5.08 --- 0.18-0.47uF 0.47uF-1.5uF 50V & 100V 0.012-0.022uF 50V: 10uF Typical Performance Characteristics Specifications Temperature coefficient Dielectric strength 25 (Flash Test) NPO and X7R: 300% rated voltage for 5 seconds with 50 mA. max NPO: 30PPM/, -55 to +125 charging current. X7R: 15%, -55 to +125 Z5U and Y5V: 250% rated voltage for 5 seconds with 50 mA. max Z5U: +22%,-56%, +10 to +85 charging current Y5V: +22%, -82%, -30 to +85 Capacitance test 25 LifeTest : (1000 hrs at max temp. applied with Flash test voltage Recovery: 6-24 hrs for NPO and 24 2 hrs for X7R & Z5U ) NPO: 1 VRMS max at 1 KHz (1 MHz for 100pF or less) NPO: 3% at 200% rated voltage, 125 X7R: 1 VRMS max at 1 KHz X7R: 3% at 200% rated voltage, 125 Z5U: 1 VRMS max at 1 KHz Z5U: 3% at 200% rated voltage, 85 Y5V: 1 VRMS max at 1 KHz Y5V: 3% at 200% rated voltage, 85 Dissipation Factor 25 Insulation Resistance after 60 sec., charging at rated NPO: 0.15% max at 1KHz, 1VRMS max (1 MHz for 1000pF or less) voltage, 25 , 55% R.H. max Z5U: 5% max (at 1KHz, 1VRMS max) NPO: 100G or 1000M-uF whichever is less X7R: (at 1KHz, 1VRMS max) Y5V: (at 1KHz, 1VRMS max) X7R : 10G or 100M-uF whichever is less Max Rated voltage Max Rated voltage Z5U : 10G or 100M-uF whichever is less 2.5% 50V 5% 50V Y5V : 10G or 1000M-uF whichever is less 3.5% 25V & 16V 7% 25V & 16V 5.0% 10V & 6.3V 10% 10V & 6.3V 13