74LVC125ABQ Nexperia

74LVC125A Quad buffer/line driver with 5 V tolerant input/outputs 3-state Rev. 7 11 April 2013 Product data sheet 1. General description The 74LVC125A consists of four non-inverting buffers/line drivers with 3-state outputs (nY) that are controlled by the output enable input (nOE). A HIGH at nOE causes the outputs to assume a high-impedance OFF-state. Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the outputs. 2. Features and benefits 5 V tolerant inputs/outputs for interfacing with 5 V logic Wide supply voltage range from 1.2 V to 3.6 V CMOS low power consumption Direct interface with TTL levels Complies with JEDEC standard: JESD8-7A (1.65 V to 1.95 V) JESD8-5A (2.3 V to 2.7 V) JESD8-C/JESD36 (2.7 V to 3.6 V) ESD protection: HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-B exceeds 200 V CDM JESD22-C101E exceeds 1000 V Multiple package options Specified from 40 C to +85 C and 40 C to +125 C74LVC125A NXP Semiconductors Quad buffer/line driver with 5 V tolerant input/outputs 3-state 3. Ordering information Table 1. Ordering information Type number Package Temperature Name Description Version range 74LVC125AD 40 C to +125 C SO14 plastic small outline package 14 leads body width SOT108-1 3.9 mm body thickness 1.47 mm 74LVC125ADB 40 C to +125 C SSOP14 plastic shrink small outline package 14 leads SOT337-1 body width 5.3 mm 74LVC125APW 40 C to +125 C TSSOP14 plastic thin shrink small outline package 14 leads SOT402-1 body width 4.4 mm 74LVC125ABQ 40 C to +125 C DHVQFN14 plastic dual in-line compatible thermal enhanced very thin SOT762-1 quad flat package no leads 14 terminals body 2.5 3 0.85 mm 4. Functional diagram 2 1A 1Y 3 2 1 1 1OE 3 1 EN1 5 2A 2Y 6 5 6 4 2OE 4 3A 3Y 9 8 9 8 3OE 10 10 nY nA 12 4A 4Y 11 12 11 13 4OE 13 nOE mna229 mna227 mna228 Fig 1. Logic symbol Fig 2. IEC logic symbol Fig 3. Logic diagram 74LVC125A All information provided in this document is subject to legal disclaimers. NXP B.V. 2013. All rights reserved. Product data sheet Rev. 7 11 April 2013 2 of 16